735, 740 GC, 740 EJECTOR, 745 Articulated Trucks Engine Supplement Caterpillar


Fuel Filter (Primary) and Fuel Filter Base - Remove and Install

Usage:

745 3F6

拆卸步骤

------ WARNING! ------

不遵守下列步骤将有可能造成人身伤亡。

渗漏或溅溢到热表面或电气部件上的燃油会引起失火。

要擦净所有泄漏或喷溅的燃油。 对燃油系统进行工作时不要吸烟。

更换燃油滤清器时,要将断路开关转到“断开”位置或断开蓄电池。


------ WARNING! ------

高温发动机部件可能导致灼伤。 进行发动机保养之前让发动机和部件冷却下来。


  1. 将蓄电池断路开关转到断开位置。


    图 1g03797777

  2. 断开软管组件 (5)、软管组件 (6) 和软管组件 (8)。

  3. 断开线束组件 (1) 和线束组件 (3)。 拆下电缆束带 (2)。 断开线束组件 (7)。 拆下燃油粗滤器 (10)。

  4. 拆下螺栓 (9) 和燃油滤清器底座 (4)。

安装步骤

  1. 按与拆卸相反的顺序安装燃油粗滤器 (10) 和燃油滤清器底座 (4)。

    1. 首次接触密封垫后,拧紧燃油粗滤器 (10) 3/4 圈。

Caterpillar Information System:

AP655F and AP655F L Asphalt Paver Machine Systems Lines (Auger Hoist)
AP555F Asphalt Paver Machine Systems Bypass Valve
C4.4 and C7.1 Engines ECM Will Not Accept Factory Passwords
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Power Train Functions Do Not Respond to Operator Console
12M Series 3 Motor Grader Fuses - Replace
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Operator Console Does Not Communicate with Machine
AP655F and AP655F L Asphalt Paver Machine Systems Window - Front
2015/02/12 The Fuel Strainer Retention has been Improved on E-Series Backhoe Loaders {1273}
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Machine Shutdown Function Does Not Respond to Operator Console
C4.4 and C7.1 Engines Electronic Service Tool Does Not Communicate
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Machine Lights Do Not Respond to Operator Console
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Machine Horn Does Not Respond to Operator Console
C7.1 Engines Codes that Inhibit Operation of Aftertreatment System
AP600F Asphalt Pavers Machine Systems Diesel Exhaust Fluid Lines
C4.4 and C7.1 Engines Test ECM Mode
Bench Test Procedure for 735C, 740C, 745C, 740 Ejector, 745, and 740 GCArticulated Truck Transmission {3030, 3073, 3167} Bench Test Procedure for 735C, 740C, 745C, 740 Ejector, 745, and 740 GCArticulated Truck Transmission {3030, 3073, 3167}
735, 740 GC, 740 EJECTOR, 745 Articulated Trucks Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
GSH420, GSH425, GSH440, GSH455, GSH520, GSH525 and GSH555 Orange Peel Grapples Safety Messages
GSH420, GSH425, GSH440, GSH455, GSH520, GSH525 and GSH555 Orange Peel Grapples Specifications
Mirrors with Improved Tempering Process May Break on Certain Off-Highway Trucks and Quarry Trucks{7319} Mirrors with Improved Tempering Process May Break on Certain Off-Highway Trucks and Quarry Trucks{7319}
2015/05/04 New Plates in the Heat Insulation Group are Now Used on Certain 773G and 775G Quarry Trucks {7150, 7150, 7150, 7251, 7301, 7329}
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Machine Systems Bucket Positioner Control - Remove and Install - Single Tilt
2015/05/06 A New Clutch Wave Spring Is Now Used On Certain 14M and 16M Motor Graders {3063, 3155, 3170}
239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Machine Systems Gas Spring - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.