AP655F and AP655F L Asphalt Paver Machine Systems Caterpillar


Window - Front

Usage:

AP655F 452


Illustration 1g03692013
Front view

Table 1
Specification for 434-0047 Front Window Gp 
Item  Qty  Part  Specification Description 
370-7288 Window Wiper Arm As  The arm tension is 6.0 ± 0.5 N (1.3 ± 0.1 lb)
7X-7729 Washer  As required, use the following washer to assure proper striker engagement to latch.
Thickness is 3.0 mm (0.12 inch)
The distance of the wiper blade from the edge of the window in the park position is 37.7 ± 5.0 mm (1.48 ± 0.20 inch)


Illustration 2g03692014
Detail view of area C
283-4738 Window Wiper Motor Gp

Table 2
Item  Qty  Part  Specification Description 
Nut  Torque to 38 ± 2 N·m (28 ± 1 lb ft)
5C-7261 Nut  Use the following tightening procedure during wiper arm installation:

1. Tighten the wiper arm nut to 23 ± 1 N·m (204 ± 9 lb in).
2. Wait for 0.5 hour minimum.
3. Again, tighten the wiper arm nut to 23 ± 1 N·m (204 ± 9 lb in)
Wiping angle is 90 ± 2 degrees. 


Illustration 3g03692015
Detail view of area D
283-4739 Window Wiper Motor Gp

Table 3
Item  Qty  Part  Specification Description 
Nut  Torque to 38 ± 2 N·m (28 ± 1 lb ft)
5C-7261 Nut  Use the following tightening procedure during wiper arm installation:

1. Tighten the wiper arm nut to 23 ± 1 N·m (204 ± 9 lb in).
2. Wait for 0.5 hour minimum.
3. Again, tighten the wiper arm nut to 23 ± 1 N·m (204 ± 9 lb in)
Wiping angle is 90 ± 2 degrees. 

Caterpillar Information System:

2015/02/12 The Fuel Strainer Retention has been Improved on E-Series Backhoe Loaders {1273}
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Machine Shutdown Function Does Not Respond to Operator Console
C4.4 and C7.1 Engines Electronic Service Tool Does Not Communicate
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Machine Lights Do Not Respond to Operator Console
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Machine Horn Does Not Respond to Operator Console
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Implement Functions Do Not Respond to Operator Console
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Engine Functions Do Not Respond to Operator Console
AP655F and AP655F L Asphalt Paver Machine Systems Washdown Group - Ecology
AP655F and AP655F L Asphalt Paver Machine Systems Hydraulic Tank and Mounting
AP600F Asphalt Pavers Machine Systems Coolant Lines
AP600F Asphalt Pavers Machine Systems Washdown Group - Ecology
2015/02/19 An Improved Pump Mounting Group Is Now Used on 424B Backhoe Loader {5073}
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Operator Console Does Not Communicate with Machine
12M Series 3 Motor Grader Fuses - Replace
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Power Train Functions Do Not Respond to Operator Console
C4.4 and C7.1 Engines ECM Will Not Accept Factory Passwords
AP555F Asphalt Paver Machine Systems Bypass Valve
AP655F and AP655F L Asphalt Paver Machine Systems Lines (Auger Hoist)
735, 740 GC, 740 EJECTOR, 745 Articulated Trucks Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
C7.1 Engines Codes that Inhibit Operation of Aftertreatment System
AP600F Asphalt Pavers Machine Systems Diesel Exhaust Fluid Lines
C4.4 and C7.1 Engines Test ECM Mode
Bench Test Procedure for 735C, 740C, 745C, 740 Ejector, 745, and 740 GCArticulated Truck Transmission {3030, 3073, 3167} Bench Test Procedure for 735C, 740C, 745C, 740 Ejector, 745, and 740 GCArticulated Truck Transmission {3030, 3073, 3167}
735, 740 GC, 740 EJECTOR, 745 Articulated Trucks Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.