C4.4 and C7.1 Engines Caterpillar


ECM Will Not Accept Factory Passwords

Usage:

525D 2L5

可能原因

  • 不正确的密码请求信息

  • 不正确的密码

建议的措施

检查密码请求信息

密码请求信息必须从正在编程的电子控制模块(ECM)中获取。 不能利用旧 ECM 提供的信息为替代 ECM 编程设定出厂密码。

确认密码请求信息与电子维修工具上显示的信息相同。

发动机序列号 - 发动机序列号必须来自电子维修工具屏幕,而非发动机信息标牌。

原因代码 - 采用出厂密码屏幕上的原因代码。 原因代码是为特定的用途而指定,因此不可互换。

循环通断钥匙开关。 尝试重新输入密码。

密码错误

确认输入了正确的密码。 检查每个密码内的每个字符。

如果重新检查密码未能排除故障,则修改用户参数。 将参数从当前值改为其他值后将用户参数重新改回原始值。 事件顺序将改变总修改次数。 新的总修改次数将要求获取新出厂密码。 获取并输入新的出厂密码。

Caterpillar Information System:

for Dozing, Gen 3.0 Remote Control Operator Console with RFID Power Train Functions Do Not Respond to Operator Console
12M Series 3 Motor Grader Fuses - Replace
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Operator Console Does Not Communicate with Machine
AP655F and AP655F L Asphalt Paver Machine Systems Window - Front
2015/02/12 The Fuel Strainer Retention has been Improved on E-Series Backhoe Loaders {1273}
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Machine Shutdown Function Does Not Respond to Operator Console
C4.4 and C7.1 Engines Electronic Service Tool Does Not Communicate
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Machine Lights Do Not Respond to Operator Console
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Machine Horn Does Not Respond to Operator Console
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Implement Functions Do Not Respond to Operator Console
for Dozing, Gen 3.0 Remote Control Operator Console with RFID Engine Functions Do Not Respond to Operator Console
AP655F and AP655F L Asphalt Paver Machine Systems Washdown Group - Ecology
AP555F Asphalt Paver Machine Systems Bypass Valve
AP655F and AP655F L Asphalt Paver Machine Systems Lines (Auger Hoist)
735, 740 GC, 740 EJECTOR, 745 Articulated Trucks Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
C7.1 Engines Codes that Inhibit Operation of Aftertreatment System
AP600F Asphalt Pavers Machine Systems Diesel Exhaust Fluid Lines
C4.4 and C7.1 Engines Test ECM Mode
Bench Test Procedure for 735C, 740C, 745C, 740 Ejector, 745, and 740 GCArticulated Truck Transmission {3030, 3073, 3167} Bench Test Procedure for 735C, 740C, 745C, 740 Ejector, 745, and 740 GCArticulated Truck Transmission {3030, 3073, 3167}
735, 740 GC, 740 EJECTOR, 745 Articulated Trucks Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
GSH420, GSH425, GSH440, GSH455, GSH520, GSH525 and GSH555 Orange Peel Grapples Safety Messages
GSH420, GSH425, GSH440, GSH455, GSH520, GSH525 and GSH555 Orange Peel Grapples Specifications
Mirrors with Improved Tempering Process May Break on Certain Off-Highway Trucks and Quarry Trucks{7319} Mirrors with Improved Tempering Process May Break on Certain Off-Highway Trucks and Quarry Trucks{7319}
2015/05/04 New Plates in the Heat Insulation Group are Now Used on Certain 773G and 775G Quarry Trucks {7150, 7150, 7150, 7251, 7301, 7329}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.