Rollover Protective Structure (ROPS) - Remove and Install
Start By:
- Remove the engine. Refer to Disassembly and Assembly, "Engine - Remove and Install".
- Attach a suitable lifting device to Roll Over Protective Structure (ROPS) (1). The weight of the ROPS is approximately
220 kg (485 lb) . - If the machine is equipped with lights, disconnect the harness assembly for the lights.
- Remove bolts (2) and remove ROPS (1) from the machine.
Show/hide table
| |
| Illustration 1 | g01032646 |
- InstallROPS (1) in the reverse order of removal.
End By:
- Install the engine. Refer to Disassembly and Assembly, "Engine - Remove and Install".
Caterpillar Information System:
CP34 and CS34 Vibratory Soil Compactors Machine Systems Piston Motor (Axle Propel) - Remove and Install
740C EJECTOR Articulated Truck Machine Systems General Information (Hydraulic System)
797 and 797B Off-Highway Truck C175-20 Engine Retrofit Procedure General Information
CP34 and CS34 Vibratory Soil Compactors Machine Systems Hydraulic Oil Filter (Propel) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Final Drive Planetary (Drum Propel) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Drum - Remove and Install
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Braking System - Test
CP34 and CS34 Vibratory Soil Compactors Machine Systems Drum Scraper - Remove and Install
RM500B Reclaimer Mixer Power Train Parking Brake - Check
RM500B Reclaimer Mixer Power Train Two-Speed Motor (Front and Rear Propel) Shift - Check
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Maintenance Interval Schedule
797 and 797B Off-Highway Truck C175-20 Engine Retrofit Procedure Introduction
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900} Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
735C and 745C Articulated Trucks Machine Systems General Information (Hydraulic System)
CP34 and CS34 Vibratory Soil Compactors Machine Systems Piston Motor (Drum Propel) - Remove and Install
3512E Tier 4 Final Engines for 785G Off-Highway Trucks SCR Catalyst Temperature Sensor - Test
Caterpillar Advanced Ride Management (CARM) Seat Suspension System General Information
Caterpillar Advanced Ride Management (CARM) Seat Suspension System Component Descriptions
Check the Area Isolation System (AIS) LADAR Connector on CAT® Command for Underground Equipped Machines{1439} Check the Area Isolation System (AIS) LADAR Connector on CAT® Command for Underground Equipped Machines{1439}
R1700G Load Haul Dump Power Train MID 081 - CID 0627 - FMI 03
R1700G Load Haul Dump Power Train MID 081 - CID 0627 - FMI 04
D6T Track Type Tractor Machine Systems Expansion Valve (Refrigerant)
RM500B Reclaimer Mixer Machine Systems Exhaust Lines
D7E Track-Type Tractor Systems Pump Control Valve (Steering)