Parts stock action only
| PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 308-7298 WATER SEPARATOR AND FUEL FILTER ASSEMBLIES FROM DEALER PARTS STOCK |
7750
|
PI70732 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field,
"7751" as the Group Number, "56" as the Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
The certain 308-7298 Water Separator and Fuel Filter Assemblies were manufactured incorrectly an in certain cases will not allow the WIF (Water In Fuel) sensor will not assemble. Refer to Image 1. |
Inspect all 308-7298 Water Separator and Fuel Filter Assemblies in dealer parts stock.
Refer to Image 2.
308-7298 Water Separator and Fuel Filter Assemblies found with 8 small holes in the bottom of the filter and have a date code of MRUNUO (Oct 24, 2018) or MAUNUO (Oct 25, 2018) must be removed from dealer parts stock.
308-7298 Water Separator and Fuel Filter Assemblies with a large center hole are correct and have a date code of either before MRUNUO (Oct 24, 2018) or after MAUNUO (Oct 25, 2018) are okay to use. Mark the package as inspected per this program, and return the part back into dealer parts stock. |
Submit one claim for all parts removed from dealer parts stock. |
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|