2014/07/15 Caterpillar


New Software Patch Is Now Available for Cat® MineStar Fleet Office v3.1.1-45 {7605, 7620}

Usage:

- ANM
Machine Control and Guidance Products:
MINESTAR ONBRD (S/N: ANM1-UP)

New software patch is now available for Cat® MineStar Fleet Office v3.1.1-45.

The new software patch is listed below:

  • 201404141213_FLT1397_LOCK_MANUALLY_DUMPING_TRUCKS

The software patch "201404141213_FLT1397_LOCK_MANUALLY_DUMPING_TRUCKS" resolves an issue with scheduled manual assignments being activated at start of service and at end of service. When the truck state changes to traveling empty, the truck will trigger a request to determine if an assignment is required. In the case where a truck has dumped at a destination with no processor or which is unavailable for assignment, an automatic assignment will override a manual assignment. This is because the load state of the truck has changed between the time of the scheduled assignment and time of end of service. The manual assignment is considered locked without considering the load state.

These upgrades should be requested by submitting a request through the appropriate service web portal:

  • https://login.salesforce.com/secur/login_portal.jsp?orgId=00D30000000YC8U&portalId=06030000000rZAN

Caterpillar Information System:

826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Clean Emissions Module - Remove and Install
725C2, 730C2 Articulated Truck LRC Engine Supplement Turbocharger - Remove and Install
AP500F Asphalt Paver Machine Systems Truck Hitch - Remove and Install
AP500F Asphalt Paver Machine Systems Steering Control (Force Control) - Remove and Install
AP655F and AP655F L Asphalt Paver Machine Systems Gear Pump (Conveyor System Charge) - Remove and Install
AP1000F Asphalt Paver Machine Systems Gear Motor (Ventilation System) - Remove and Install
AP500F Asphalt Paver Machine Systems Footshaft - Remove and Install
AP655F and AP655F L Asphalt Paver Machine Systems Final Drive Planetary - Remove and Install
AP500F Asphalt Paver Machine Systems Final Drive Planetary (Drag Conveyor) - Remove and Install
2014/07/22 Improved Multi-Purpose Bucket Lever Mounting Now Used on E and F Series BHL {5063}
AP500F Asphalt Paver Machine Systems Final Drive Planetary (Auger Conveyor) - Remove and Install
AP500F Asphalt Paver Machine Systems Feeder Drive Shaft Group - Remove and Install
Load Haul Dump Power Train STIC Lockout Control
R3000H Load Haul Dump Power Train STIC Lockout Control
R1600H Load Haul Dump Power Train Limit Switch (STIC Lockout Control)
Altering the Settings of Gear Limits in the Transmission ECM {7000, 7620} Altering the Settings of Gear Limits in the Transmission ECM {7000, 7620}
Issues with the "DPF Ash Service" Procedure in Cat ® Electronic Technician (Cat ET) Version 2014A{0709, 0785, 108F} Issues with the "DPF Ash Service" Procedure in Cat ® Electronic Technician (Cat ET) Version 2014A{0709, 0785, 108F}
424B Backhoe Loader Machine Systems Bank Valve (Backhoe) - Assemble
825K Soil Compactor Restricted Visibility
826K Landfill Compactor Restricted Visibility
950M, 962M, 950M Z and 962M Z Wheel Loaders Nitrogen Oxide Sensor - Remove and Install - Nitrogen Oxide Sensor for Clean Emissions Module (CEM)
725C2, 730C2 Articulated Truck LRC Engine Supplement Engine - Remove and Install
725C2, 730C2 Articulated Truck LRC Engine Supplement Engine Oil Pump - Remove and Install
825K Soil Compactor Leaving the Machine
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.