Steering Control (Force Control) - Remove and Install
Start By:
- Remove the steering wheel. Refer to Disassembly and Assembly, "Steering Wheel - Remove and Install".
- Remove the screws and plate assembly (1).
- Remove the screws and plate assembly (2).
Show/hide table
Illustration 2 g03708106 - Tilt control panel (4) towards the seat. Remove the screws and cover assembly (3).
Show/hide table
Illustration 3 g03708108 - Loosen the screw and disconnect harness assembly (5) from control panel (4).
Show/hide table
Illustration 4 g03708109 - Remove the screws and cover assembly (6).
Show/hide table
Illustration 5 g03708110 - Remove six bolts (7) and control panel (4).
Show/hide table
Illustration 6 g03708111 - Remove the cable straps securing harness assembly (5) to steering column (8).
- Remove the bolts and steering column (8).
Show/hide table
Illustration 7 g03708113 - Remove the cable straps and disconnect harness assembly (9).
Show/hide table
Illustration 8 g03708115 - Remove two bolts (10) and steering control (11).
Show/hide table
Illustration 1 | g03708099 |
- Install steering control (11) in the reverse order of removal.
End By:
- Install the steering wheel. Refer to Disassembly and Assembly, "Steering Wheel - Remove and Install".
Caterpillar Information System:
AP655F and AP655F L Asphalt Paver Machine Systems Gear Pump (Conveyor System Charge) - Remove and Install
AP1000F Asphalt Paver Machine Systems Gear Motor (Ventilation System) - Remove and Install
AP500F Asphalt Paver Machine Systems Footshaft - Remove and Install
AP655F and AP655F L Asphalt Paver Machine Systems Final Drive Planetary - Remove and Install
AP500F Asphalt Paver Machine Systems Final Drive Planetary (Drag Conveyor) - Remove and Install
2014/07/22 Improved Multi-Purpose Bucket Lever Mounting Now Used on E and F Series BHL {5063}
AP500F Asphalt Paver Machine Systems Final Drive Planetary (Auger Conveyor) - Remove and Install
AP500F Asphalt Paver Machine Systems Feeder Drive Shaft Group - Remove and Install
AP500F Asphalt Paver Machine Systems Counterbalance Valve (Hopper Hoist, Tow Point) - Remove and Install
AP1000F Asphalt Paver Machine Systems Control Valve (Vibratory) - Remove and Install
2014/11/07 A New Tensioner and Alternator Are Used on Certain Off-Highway Trucks {1405}
950M, 962M, 950M Z and 962M Z Wheel Loaders Turbocharger - Install - Second Stage Turbocharger
AP500F Asphalt Paver Machine Systems Truck Hitch - Remove and Install
725C2, 730C2 Articulated Truck LRC Engine Supplement Turbocharger - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Clean Emissions Module - Remove and Install
2014/07/15 New Software Patch Is Now Available for Cat® MineStar Fleet Office v3.1.1-45 {7605, 7620}
Load Haul Dump Power Train STIC Lockout Control
R3000H Load Haul Dump Power Train STIC Lockout Control
R1600H Load Haul Dump Power Train Limit Switch (STIC Lockout Control)
Altering the Settings of Gear Limits in the Transmission ECM {7000, 7620} Altering the Settings of Gear Limits in the Transmission ECM {7000, 7620}
Issues with the "DPF Ash Service" Procedure in Cat ® Electronic Technician (Cat ET) Version 2014A{0709, 0785, 108F} Issues with the "DPF Ash Service" Procedure in Cat ® Electronic Technician (Cat ET) Version 2014A{0709, 0785, 108F}
424B Backhoe Loader Machine Systems Bank Valve (Backhoe) - Assemble
825K Soil Compactor Restricted Visibility
826K Landfill Compactor Restricted Visibility