Truck Hitch - Remove and Install
Show/hide table
 |
|
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
- Lift the apron out of the way.
Show/hide table
Illustration 1 g01360750 - Disconnect hose assemblies (1).
Show/hide table
Illustration 2 g06253976 Show/hide table
Illustration 3 g03707234 - Attach a suitable lifting device to truck hitch (2). The weight of truck hitch (2) is approximately
315 kg (694 lb) . - Remove the bolt, pin assembly (3), and truck hitch (2).
- Install truck hitch (2) in the reverse order of removal.
Caterpillar Information System:
AP500F Asphalt Paver Machine Systems Steering Control (Force Control) - Remove and Install
AP655F and AP655F L Asphalt Paver Machine Systems Gear Pump (Conveyor System Charge) - Remove and Install
AP1000F Asphalt Paver Machine Systems Gear Motor (Ventilation System) - Remove and Install
AP500F Asphalt Paver Machine Systems Footshaft - Remove and Install
AP655F and AP655F L Asphalt Paver Machine Systems Final Drive Planetary - Remove and Install
AP500F Asphalt Paver Machine Systems Final Drive Planetary (Drag Conveyor) - Remove and Install
2014/07/22 Improved Multi-Purpose Bucket Lever Mounting Now Used on E and F Series BHL {5063}
AP500F Asphalt Paver Machine Systems Final Drive Planetary (Auger Conveyor) - Remove and Install
AP500F Asphalt Paver Machine Systems Feeder Drive Shaft Group - Remove and Install
AP500F Asphalt Paver Machine Systems Counterbalance Valve (Hopper Hoist, Tow Point) - Remove and Install
AP1000F Asphalt Paver Machine Systems Control Valve (Vibratory) - Remove and Install
2014/11/07 A New Tensioner and Alternator Are Used on Certain Off-Highway Trucks {1405}
725C2, 730C2 Articulated Truck LRC Engine Supplement Turbocharger - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Clean Emissions Module - Remove and Install
2014/07/15 New Software Patch Is Now Available for Cat® MineStar Fleet Office v3.1.1-45 {7605, 7620}
Load Haul Dump Power Train STIC Lockout Control
R3000H Load Haul Dump Power Train STIC Lockout Control
R1600H Load Haul Dump Power Train Limit Switch (STIC Lockout Control)
Altering the Settings of Gear Limits in the Transmission ECM {7000, 7620} Altering the Settings of Gear Limits in the Transmission ECM {7000, 7620}
Issues with the "DPF Ash Service" Procedure in Cat ® Electronic Technician (Cat ET) Version 2014A{0709, 0785, 108F} Issues with the "DPF Ash Service" Procedure in Cat ® Electronic Technician (Cat ET) Version 2014A{0709, 0785, 108F}
424B Backhoe Loader Machine Systems Bank Valve (Backhoe) - Assemble
825K Soil Compactor Restricted Visibility
826K Landfill Compactor Restricted Visibility
950M, 962M, 950M Z and 962M Z Wheel Loaders Nitrogen Oxide Sensor - Remove and Install - Nitrogen Oxide Sensor for Clean Emissions Module (CEM)