725C2, 730C2 Articulated Truck LRC Engine Supplement Caterpillar


Engine Oil Pump - Remove and Install

Usage:

730C2 2L7

Removal Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g03699609

  1. Disconnect tube assemblies (1).


    Illustration 2g03699645

  2. Remove bolts (2) and remove elbow (3).


    Illustration 3g03699657

  3. Disconnect tube assemblies (4). Remove bolts (5) and (6). Remove engine oil pump. (7) and the O-ring seal.

Installation Procedure

  1. Install engine oil pump (7) in the reverse order of removal.

    1. Lubricate all seals with clean engine oil.

Caterpillar Information System:

725C2, 730C2 Articulated Truck LRC Engine Supplement Engine - Remove and Install
950M, 962M, 950M Z and 962M Z Wheel Loaders Nitrogen Oxide Sensor - Remove and Install - Nitrogen Oxide Sensor for Clean Emissions Module (CEM)
826K Landfill Compactor Restricted Visibility
825K Soil Compactor Restricted Visibility
424B Backhoe Loader Machine Systems Bank Valve (Backhoe) - Assemble
Issues with the "DPF Ash Service" Procedure in Cat ® Electronic Technician (Cat ET) Version 2014A{0709, 0785, 108F} Issues with the "DPF Ash Service" Procedure in Cat ® Electronic Technician (Cat ET) Version 2014A{0709, 0785, 108F}
Altering the Settings of Gear Limits in the Transmission ECM {7000, 7620} Altering the Settings of Gear Limits in the Transmission ECM {7000, 7620}
R1600H Load Haul Dump Power Train Limit Switch (STIC Lockout Control)
R3000H Load Haul Dump Power Train STIC Lockout Control
Load Haul Dump Power Train STIC Lockout Control
2014/07/15 New Software Patch Is Now Available for Cat® MineStar Fleet Office v3.1.1-45 {7605, 7620}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Clean Emissions Module - Remove and Install
825K Soil Compactor Leaving the Machine
826K Landfill Compactor Leaving the Machine
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
Procedure to Retrofit a Single Window Wiper to Dual Window Wipers on 770G and 772G Off-Highway Trucks{7305} Procedure to Retrofit a Single Window Wiper to Dual Window Wipers on 770G and 772G Off-Highway Trucks{7305}
559C and 579C Knuckleboom Loaders Pilot Hydraulic System
950M, 962M, 950M Z and 962M Z Wheel Loaders Diesel Exhaust Fluid Module - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
986H Wheel Loader Transmission from Output Transfer Gears - Separate
2014/07/17 New Software Is Now Available for Cat® Minestar Fleet and Health Office v4.0.5 {7605, 7620}
Cat® Terrain Office Software File Visualization in 3D
R1600H Load Haul Dump Power Train STIC Lockout Control
Installation of the 240-7864 12v Supply Gp on Certain Backhoe Loaders{5056, 5057} Installation of the 240-7864 12v Supply Gp on Certain Backhoe Loaders{5056, 5057}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.