AP655F and AP655F L Asphalt Paver Machine Systems Caterpillar


Grade Control Mounting

Usage:

AP655F 655


Illustration 1g03691450

Table 1
Specification for 433-1491 Screed Control and Mounting Gp 
Item  Qty  Part  Specification Description 
105-3486 Bolt(1)  Before assembly, apply blue Loctite 243 to the threads.
Torque to 3.11 ± 0.28 N·m (28 ± 2 lb in)
105-3477 Bolt  Torque to 30 ± 7 N·m (266 ± 62 lb in)
(1) Ensure that bolt and operator monitor group are fully seated to screed control group.

Caterpillar Information System:

14L Motor Grader Implement Electronic Control System MID 145 - CID 1326 - FMI 02
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Tilt Linkage) - Replace
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Lift Linkage) - Replace
420F2 IT, 420F2 ST, 427F2, 428F2, 430F2 IT, 430F2 ST, 432F2, 434F2 and 444F2 Backhoe Loaders Sensor Supply - Test
M318F, M320F and M322F Wheeled Excavators Hydraulic System Electronic Control (Return System)
AP500F Asphalt Paver Machine Systems Counterbalance Valve (Hopper Hoist, Tow Point) - Disassemble
AP500F Asphalt Paver Machine Systems Counterbalance Valve (Hopper Hoist, Tow Point) - Assemble
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
M318F, M320F and M322F Wheeled Excavators Hydraulic System Service Brake Control Valve
M318F, M320F and M322F Wheeled Excavators Hydraulic System Accumulator (Brake Control Valve)
AP655F and AP655F L Asphalt Paver Machine Systems Control Valve (Vibratory) - Disassemble
AP655F and AP655F L Asphalt Paver Machine Systems Control Valve (Vibratory) - Assemble
14L Motor Grader Implement Electronic Control System MID 082 - CID 1326 - FMI 02
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission - Accumulator Test
AP1000F Asphalt Paver Machine Systems Solenoid Valve (Tow Point) - Remove and Install
14L Motor Grader Implement Electronic Control System General Information
2014/07/29 New Resistance Temperature Sensors are Now Used in the Power Generator Group on Certain Off-Highway Trucks {1439, 4450}
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
950M, 962M, 950M Z and 962M Z Wheel Loaders Electric Starting Motor - Remove and Install
Upshift / Downshift Push Button Switch Failures On The Left Hand Joystick Used On M Series and M Series 2 Motor Grader{5705, 7332} Upshift / Downshift Push Button Switch Failures On The Left Hand Joystick Used On M Series and M Series 2 Motor Grader{5705, 7332}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Pilot Pressure - Test and Adjust
2014/06/26 A New Seal Assembly for the Differential and Bevel Gear Group Is Now Used on Certain 797 Off-Highway Trucks {3256, 3258, 3281, 7555}
M318F, M320F and M322F Wheeled Excavators Hydraulic System Quick Coupler System
M318F, M320F and M322F Wheeled Excavators and MH3022 and MH3024 Material Handlers Stopping the Engine
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.