Differential and Bevel Gear (Front and Rear) - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-9760 | Jack Stand | 2 |
B | 8T-0375 | Forcing Bolts | 4 |
C | 439-3938 | Link Brackets | 2 |
Start By:
- Remove the front or rear axle.
- Install Tooling (A) under the axle housing in order to prevent the axle from turning. Yoke (1) for the differential should be in an upright position.
- Remove bolts (2) for differential housing (3).
Show/hide table
Illustration 2 g01189091 - Install Tooling (B) in the threaded holes on differential housing (3) in order to loosen differential housing (3) from the axle housing.
Show/hide table
Illustration 3 g01189095 - Install Tooling (C) and a suitable lifting device to yoke (1). Raise the differential housing from the axle housing. The weight of differential housing (3) is approximately
250 kg (550 lb) . - Remove Tooling (B).
Show/hide table
Illustration 1 | g01189069 |
Caterpillar Information System:
730C and 730C EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Install
C4.4 Industrial Engine Maintenance Interval Schedule
C1.5 and C2.2 Engines for Caterpillar Built Machines System Overview
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Solenoid Valve (Ride Control)
990K Wheel Loader Systems STIC Control
2014/05/12 New Software Patch Is Now Available for Cat® MineStar Fleet Office v4.0.4 {7605}
MH3037 Material Handler Engine Supplement Cooling System Package (Radiator, Aftercooler, Refrigerant Condenser) - Remove and Install
725C Articulated Truck Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
725C Articulated Truck Solenoid Valve (ARD Fuel) - Remove and Install - Pilot
Conveyor Systems on Certain Asphalt Pavers Have Failed to Operate Due to a Loss of Charge Pressure to Conveyor Pumps{5073} Conveyor Systems on Certain Asphalt Pavers Have Failed to Operate Due to a Loss of Charge Pressure to Conveyor Pumps{5073}
2014/08/18 A New U-Cup Seal Is Used on the Front Suspension Group for Certain 785C and 785D Off-Highway Trucks {7201}
2014/11/19 A New Rear Suspension Head Assembly and Sealing System are Now used on Certain 785C and 785D Off-Highway Trucks {7200, 7201, 7213, 7230}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Parking Brake - Test
725C Articulated Truck Temperature Sensor (Catalyst Inlet) - Remove and Install
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Parking Brake - Manual Release
794 AC Off-Highway Truck Systems Steering Accumulator
2014/07/17 New Coolant Tubes Are Now Used for Certain 793F and 795F Off-Highway Trucks {1380}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Brake Accumulator - Test and Charge
794 AC Off-Highway Truck Systems Steering Metering Pump
725C Articulated Truck Power Train Differential and Bevel Gear (Center) - Remove and Install
794 AC Off-Highway Truck Systems Steering Control Valve
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Parking Brake Actuator - Adjust
2014/05/30 An Improved Torque Converter Lines Group and Power Train Oil Lines Group are Now Used On Certain 789D and 793D Off-Highway Trucks {3016, 3101, 3154}
2014/07/25 New STIC Lockout Control Limit Switch Now Used on Certain R1300G Load Haul Dump Machines {1435, 3034, 4343}