794 AC Off-Highway Truck Systems Caterpillar


Gear Pump (Hoist)

Usage:

794 AC MN5


Illustration 1g06342384
(1) Gear pump (Hoist)
(2) Suction port
(3) Discharge ports

Gear pump (1) is a tandem section gear-type pump that is mounted to the pump drive. The pump drive is driven by a drive link from the generator.

Gear pump (1) pulls oil from the suction port of the hydraulic tank into suction port (2). The oil flows from suction port (2) through the gear pump to discharge ports (3). The oil is then flows through the oil filters to the hoist control valve that distributes the hydraulic oil to the hoist system.

Caterpillar Information System:

16M Series 3 and 18M Series 3 Motor Grader General Information (Hydraulic System)
794 AC Off-Highway Truck Systems Hoist Control
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Electronic Control (HVAC System)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Location of Components (HVAC System)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems General Information (HVAC System)
R3000H Load Haul Dump Engine Overspeed Control
950M, 962M, 950M Z and 962M Z Wheel Loaders Power Train Transmission - Assemble
730C2 and 725C2 Articulated Truck Power Train Gear Pump (Output Transfer Gear) - Assemble
730C2 and 725C2 Articulated Truck Power Train Gear Pump (Output Transfer Gear) - Disassemble
Health Onboard HIM 2.0.3 Fails to Respond VimsSourceCodeInquiry2 Message from Fleet Office when Connected to VIMS{7605} Health Onboard HIM 2.0.3 Fails to Respond VimsSourceCodeInquiry2 Message from Fleet Office when Connected to VIMS{7605}
730C2 and 725C2 Articulated Truck Power Train Gear Pump (Output Transfer Gear) - Remove and Install
2864C Site Prep Tractor Reference Material
2014/04/30 New Software Is Now Available for Certain 3516B Engines in a Large Off-Highway Truck Application {1920, 7620}
Commissioning Guide for Remote Control Operator Station and Vision System Used on Cat® Command for Dozing {7008, 7605, 7610, 7620} Commissioning Guide for Remote Control Operator Station and Vision System Used on Cat® Command for Dozing {7008, 7605, 7610, 7620}
794 AC Off-Highway Truck Systems Hoist Cylinder
794 AC Off-Highway Truck Systems Oil Filter (Hydraulic)
586C Site Prep Tractor IQAN Monitoring ; Control System IQAN Error Messages and Warnings
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G Subscriber Identity Module (SIM) Card - Test
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G Electrical Power Supply - Test
2014/05/09 New Firmware Version 4.67 Is Now Available For MS352 MPGPS Receivers {7010, 7620}
16M Series 3 and 18M Series 3 Motor Grader Brake System Air - Purge
D6T Track-Type Tractor Machine Systems Refrigerant Accumulator - Remove and Install
16M Series 3 and 18M Series 3 Motor Grader General Information (Steering System)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pilot Valve (STIC Steering)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.