E181
Conditions Which Generate This Code:
EID 181 Limited Mobility Mode
Limited Mobility Mode is represented by event EID 181. This code is triggered upon initial startup and remains active for up to 5 minutes while the system initializes. This code has no negative impact on the machine. The purpose of this code is to limit overall functionality until the system is fully operational. While this code is active, the machine will be unable to mode change into autonomous mode.
Test Step 1. ALLOW MACHINE TO COMPLETE STARTUP.
Allow machine to complete startup processes. No further action should be necessary.
Expected Result:
EID 181 will clear automatically.
Results:
- EID 181 will clear automatically. - STOP
- EID 181 remains active. The cause of the problem is uncertain. Contact Caterpillar technical support with the information that has been gathered. - STOP
Caterpillar Information System:
Cat® Command For Hauling Event Code List
C7 Engine for Caterpillar Built Machine Fuel Transfer Pump - Remove and Install
Cat® Command For Hauling Truck Stops in Dump Area
Cat® Command For Hauling Truck Does Not Leave when Loaded
CAT MT4400D AC Off-Highway Truck Machine Systems Lubrication Pump (Automatic) - Remove and Install
Cat® Command For Hauling Operating Mode Does Not Change from Manual Mode to Autonomous Mode
Cat® Command For Hauling Operating Mode Does Not Change from Autonomous Mode to Manual Mode
Cat® Command For Hauling Machine Stops
Cat® Command For Hauling Machine Operation Is Slow
Cat® Command For Hauling Machine Does Not Send a Dipper Report
C7 Engine for Caterpillar Built Machine Air Inlet Heater - Remove and Install
Cat® Detect Object Detection System MID 134 - CID 3318 - FMI 11
586C Site Prep Tractor Machine Systems Cab Tilt Cylinder
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Control - Control System
735C, 740C EJECTOR and 745C Articulated Trucks Symptom Troubleshooting
C7 Engine for Caterpillar Built Machine Electronic Unit Injector Sleeve - Remove and Install
2014/06/23 New Spacers for Transmission Shafts Two and Three are Now Available for Certain Motor Graders {3063, 3155, 3170}
735C, 740C EJECTOR and 745C Articulated Trucks Backup Alarm Always Off
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Service Brakes
735C, 740C EJECTOR and 745C Articulated Trucks Backup Alarm Always On
2014/05/30 The Handrail Group has been Improved on the 793F Off-Highway Truck {7256}
C7 Engine for Caterpillar Built Machine Unit Injector Hydraulic Pump - Remove and Install
C7 Engine for Caterpillar Built Machine Turbocharger - Remove and Install
C7 Engine for Caterpillar Built Machine Exhaust Manifold - Remove and Install