Removal Procedure
The Power Train Electric Drive System and the Accessory Power System will contain hazardous voltage levels during machine operation and for a period of time after machine shutdown. Do not remove any covers that will expose energized electrical components while the engine is operating. Do not remove any covers that will expose the energized electrical components while the components remain energized following an engine shutdown. Do not perform any type of electrical maintenance on the orange hazardous voltage conductors, the power train components or the accessory power system components while the engine is operating. Do not perform any type of electrical maintenance on the orange hazardous voltage conductors, the power train components or the accessory power system components while the components remain energized following an engine shutdown. Always perform the safe shutdown and de-energizing procedure before performing electrical service on the Power Train Electric Drive System or the Accessory Power System. Failure to follow these instructions could result in personal injury or death. |
- Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
- Shutdown and de-energizing the machine. Refer to Operation and Maintenance Manual, "Electrical Shutdown and Voltage Discharge".
- Disconnect hose assembly (1) .
Illustration 1 | g03657060 |
- Disconnect hose assembly (2) and hose assemblies (3) .
Illustration 2 | g03657061 |
- Remove bolts (4) .
Illustration 3 | g03657101 |
- Use two people and a suitable lifting device to remove lubrication pump (5). The weight of lubrication pump (5) is approximately 32 kg (70 lb).
Illustration 4 | g03657078 |
Installation Procedure
- Install lubrication pump (5) in the reverse order of removal.