R3000H Load Haul Dump Machine Systems Caterpillar

Installation Procedure

Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.

Show/hide table

Illustration 1	g01106628

1. Install Tooling (A) and a suitable lifting device to STIC steering control valve (1). The weight of STIC steering control valve (1) is approximately 48 kg (105 lb).

2. Install STIC steering control valve (1) and three bolts (10).
   Show/hide table

   Illustration 2	g01095675

3. Connect hose assemblies (8) and (9).
   Show/hide table

   Illustration 3	g01095672

4. Connect hose assemblies (7), (6), (5), (4) and (3).
   Show/hide table

   Illustration 4	g01095671

5. Connect hose assembly (2) to STIC steering control valve (1).

6. Fill the hydraulic tank with oil to the correct level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check".

End By:

1. Remove the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".