Main Control Valve - Disassemble
拆解步骤
开始:
- 拆下主控制阀。
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 拆下盖组件 (1) 和 O 型密封圈 (2) 。
Show/hide table
图 1 | g03095718 |
Show/hide table
图 2 | g03096017 |
- 拆下盖组件 (3) 。 拆下螺塞 (4) 和 O 形密封圈 (5) 。
Show/hide table
图 3 | g03096016 |
Show/hide table
图 4 | g03096078 |
- 拆下盖组件 (6) 和 O 型密封圈 (7) 。
Show/hide table
图 5 | g03096136 |
Show/hide table
图 6 | g03096197 |
- 拆下盖组件 (8) 、O 形密封圈 (9) 和滑阀 (10) 。
Show/hide table
图 7 | g03096258 |
Show/hide table
图 8 | g03096262 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下安全阀 (11) 和 (12) 。
Show/hide table
图 9 | g03097916 |
- 拆下盖组件 (13) 、O 形密封圈 (14) 和滑阀 (15) 。
Show/hide table
图 10 | g03097919 |
Show/hide table
图 11 | g03098085 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
注: 拆卸时,在滑阀上做识别标记。
- 拆下阀组件 (16) 。
Show/hide table
图 12 | g03098176 |
- 拆下阀和 O 形密封圈 (17) 、 (18) 和 (20) 。
Show/hide table
图 13 | g03098500 |
- 拆下螺塞 (19) 和 O 形密封圈。
- 拆下阀 (21) 和 O 形密封圈 (22) 。
Show/hide table
图 14 | g03098546 |
Show/hide table
图 15 | g03098598 |
- 拆下阀 (23) 。
Show/hide table
图 16 | g03099716 |
- 拆下螺塞和 O 形密封圈 (24) 。 拆下阀组件和 O 形密封圈 (25) 。
Show/hide table
图 17 | g03099816 |
- 卸下盖和 O 形密封圈 (26) 。 拆下阀组件和 O 形密封圈 (27) 。
Show/hide table
图 18 | g03099865 |
- 拆下阀 (28) 。
Show/hide table
图 19 | g03099917 |
Show/hide table
图 20 | g03102416 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下O 形密封圈 (29) 、弹簧 (30) 和阀组件 (31) 。
- 拆下螺塞和 O 形密封圈 (32) 。
Show/hide table
图 21 | g03102916 |
俯视图 |
- 拆下螺塞和 O 形密封圈 (33) 。 拆下阀组件和 O 形密封圈 (34) 。
Show/hide table
图 22 | g03102918 |
仰视图 |
- 拆下螺塞和 O 形密封圈 (35) 、 (36) 和 (37) 。
Show/hide table
图 23 | g03102776 |
- 拆下阀和 O 形密封圈 (38) 。 拆下阀和 O 形密封圈 (39) 。
Show/hide table
图 24 | g03102796 |
- 拆下阀 (40) 。 拆下O 形密封圈 (41) 、弹簧 (42) 和阀组件 (43) 。
Show/hide table
图 25 | g03102880 |
Show/hide table
图 26 | g03103040 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下螺塞和 O 形密封圈 (45) 。
- 拆下螺栓 (46) 。
- 分开主控制阀 (48) 。 拆下 O 形密封圈 (47) 。
Show/hide table
图 27 | g03103096 |
Caterpillar Information System:
910K and 914K Compact Wheel Loaders Engine Supplement Pressure Sensor (Mass Air Flow) - Remove and Install
910K and 914K Compact Wheel Loaders Engine Supplement Pressure Sensor (Mass Air Flow) - Remove and Install
12M Motor Grader Engine Supplement Radiator - Remove and Install
2012/06/25 The Drive Shaft of the Final Drive Group Has Been Improved on Certain Motor Graders {4050, 4056}
RM-500 Soil Stabilizer Emulsion Spray System - Clean
Check the Brake Group Retaining Bolts on Certain R2900G and R3000H Load Haul Dump Machines {4251, 4267} Check the Brake Group Retaining Bolts on Certain R2900G and R3000H Load Haul Dump Machines {4251, 4267}
424B Backhoe Loader Sampling Interval and Location of Sampling Valve
773G and 775G OFF-Highway Trucks Engine Supplement Gear Group (Rear) - Install
12M Motor Grader Engine Supplement Aftercooler - Remove and Install
773G and 775G OFF-Highway Trucks Engine Supplement Gear Group (Rear) - Assemble
2012/07/25 A New Fastener for Certain Compact Track Loader and Skid Steer Loader Equipped with Electric Coupler and or Self Level Harness. {5057, 6129}
773G and 775G OFF-Highway Trucks Engine Supplement Gear Group (Rear) - Disassemble
2384C, 2484C, 559C and 579C Knuckleboom Loaders Machine Systems Main Control Valve - Assemble
2012/07/20 The Rod Assembly for the Platform Enclosure Group Has Been Updated on Certain Track-Type Tractors and Pipelayers {726A}
12M Motor Grader Engine Supplement Rear Chassis Support - Remove and Install
2012/07/31 New Fluid Sampling Valve Is Now Used in the Hydraulic Oil Cooler Lines Group on 777G Off-Highway Trucks {1374, 5057}
Software Installation Instructions of the Plus+1 Service Tool for Caterpillar P1STC Is Available for Caterpillar Paving Products {0785} Software Installation Instructions of the Plus+1 Service Tool for Caterpillar P1STC Is Available for Caterpillar Paving Products {0785}
563C and 573C Wheel Feller Bunchers Additional Messages
MH3049 Material Handler C9 Engine Supplement Oil Pan - Remove and Install
12M Motor Grader Engine Supplement Flywheel and Rear Gear Group - Remove and Install - Drive Gear
12M Motor Grader Engine Supplement Rear Gear Group - Remove and Install
12M Motor Grader Engine Supplement Flywheel Housing - Remove and Install
12M Motor Grader Engine Supplement Engine - Remove and Install
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat® Products{108D, 1408, 1919} Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat® Products{108D, 1408, 1919}