1990/03/12 Caterpillar


New Rear Gear Group Has Spur Gears Instead Of Helical Gears For Longer Service Life{1204,1206,1212}

Usage:


3606 ( 8RB ),
3608 ( 6MC ) Industrial Engines

Description of Change: A new rear gear group is used that has high contact ratio spur gears. Formerly, helical gears were used. The new gears are stronger than the former gears.

Adaptable To: The new 9Y9345 Rear Gear Group is a direct replacement for the former 1W0792 Rear Gear Group. The complete group must be replaced; do not try to use part of the former gears with part of the new gears.


Components in 9Y9345 Rear Gear Group.

Caterpillar Information System:

1990/03/12 New Hand-Held Microfiche Reader Available{0354,0374}
1990/03/12 New Loupe (Magnifier) Available For Inspecting Failed Or Broken Parts{0777}
1990/03/05 New Piston Pin Retainer Used In 3600 Family Of Engines{1214}
1990/03/05 New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak{1053,1077}
1990/03/05 New Plug Used In Front Housing For Fuel Injection Control Group{1151,1298}
1990/03/05 2N4620 Rubber Drive Block Reinstated For Parts Service{3305}
1990/03/05 Preventive Maintenance (PM) Kits Available For 3116 Truck Engines{7258,0645,1261,1318,1352,7542}
1990/03/05 New Fuel Inlet Fitting Eliminates Breakage; New Screen Used In Inlet Fitting{1250,1252,1261}
1990/03/05 Changing Mounting Position Of 9F3099 And 302266 Magnetic Switches (Relays) May Extend Service Life{1426}
1990/03/05 Do Not Use Lubricant On Sticking Start (Ignition) Switches{1416}
1990/03/05 4C5623 Smoke Candles Can Help Locate Air Leaks in Cab{7301,7325}
1990/02/26 New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, New Cylinder Head Assemblies With New Inlet Valve Seats {1100,1103,1104,1105}
1990/03/12 Shorter Bolt Used To Hold Oil Pan Drain Cover{1302}
1990/03/12 Idle Shutdown Timer Used In Auxiliary Power Applications{1705,1706,4267}
1990/03/12 9W2126 Module (Relay Module){7490}
1990/03/19 New Air Conditioner Thermostatic Switches Used {7337}
1990/03/19 Possible Overvoltage Conditions From Output Of VR3 Voltage Regulator {4467,4474}
1990/03/26 New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26 New Personality Modules Require New Service Program Modules {1902}
1990/03/26 Caterpillar Announces 460 hp 3406B (5YG) Heavy-Duty Diesel Truck Engine {1000}
1990/04/02 Correct Replacement Of Forward Warning Horns{7402}
1990/04/02 New Flywheel Ring Gear Available To Improve Starter Engagement{1158,1454}
1990/04/02 New Valve Lifter Improves Oil Flow To Top Of Engine{1112,1119}
1990/04/02 Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals{1204,1237,7568}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.