Magnetic Strainer And Shut-Off Valve
Usage:
Remove Magnetic Strainer And Shut-Off Valve
1. Remove four bolts (2) and elbow (5).
2. Remove three bolts (3), strainer (1) and the gasket.
3. Remove shut-off valve (4) from the strainer.
Install Magnetic Strainer And Shut-Off Valve
1. Install shut-off valve (2) on strainer (1). Put the gasket and the strainer in position and install three bolts (4).
2. Put lubrication on seal (5) and install elbow (3) with four bolts.
Disassemble Ass Assemble Magnetic Strainer And Shut-Off Valve
start by:
a) remove magnetic strainer and shut-off valve
1. Remove four nuts (1), cover (2) and the seal.
2. Remove washer (5), screen (4) and tube assembly (3) from the housing.
3. Install tube assembly (3), screen (4) and washer (5).
4. Install the seal and cover (2) with four nuts.
end by:
a) install magnetic strainer and shut-off valve
Caterpillar Information System:
7271 MARINE TRANSMISSION Oil Pump
7271 MARINE TRANSMISSION Testing and Adjusting
7271 MARINE TRANSMISSION Systems Operation
3412 INDUSTRIAL & MARINE ENGINES Crankshaft
3412 INDUSTRIAL & MARINE ENGINES Crankshaft Main Bearings
3412 INDUSTRIAL & MARINE ENGINES Cylinder Liners
3412 INDUSTRIAL & MARINE ENGINES Pistons
3412 INDUSTRIAL & MARINE ENGINES Piston Cooling Tubes
3412 INDUSTRIAL & MARINE ENGINES Connecting Rod Bearings
3412 INDUSTRIAL & MARINE ENGINES Oil Pan, Oil Pump
3412 INDUSTRIAL & MARINE ENGINES Spacer Plates
3412 INDUSTRIAL & MARINE ENGINES Bridge Dowels
7271 MARINE TRANSMISSION Transmission Filter Group
7271 MARINE TRANSMISSION Selector Control Valve Group
7271 MARINE TRANSMISSION Oil Cooler
7271 MARINE TRANSMISSION Top Shafts
7271 MARINE TRANSMISSION Input Shaft
7271 MARINE TRANSMISSION Output Shaft
7271 MARINE TRANSMISSION Output Shaft Seals
7271 MARINE TRANSMISSION Input Shaft Seals
7271 MARINE TRANSMISSION Oil Pump (9J7232)
7271 MARINE TRANSMISSION Oil Filter (2S6457)
7271 MARINE TRANSMISSION Control Valve (7L5392)
7271 MARINE TRANSMISSION Directional Clutches (3N6195, 3N6196)