Input Shaft Seals
Usage:
Remove And Install Input Shaft Seals
1. Remove three bolts (2), plate (3), the gasket and flange (1).
2. Use tooling (A) to remove two seals (4) and (5).
3. Use tool (B) to install seal (5), lip in.
4. Use tool (B) to install seal (4), lip out, even with the face of the cover.
5. Install flange (1), the gasket, plate (3) and three bolts (2).
Caterpillar Information System:
7271 MARINE TRANSMISSION Output Shaft Seals
7271 MARINE TRANSMISSION Output Shaft
7271 MARINE TRANSMISSION Input Shaft
7271 MARINE TRANSMISSION Top Shafts
7271 MARINE TRANSMISSION Oil Cooler
7271 MARINE TRANSMISSION Selector Control Valve Group
7271 MARINE TRANSMISSION Transmission Filter Group
7271 MARINE TRANSMISSION Magnetic Strainer And Shut-Off Valve
7271 MARINE TRANSMISSION Oil Pump
7271 MARINE TRANSMISSION Testing and Adjusting
7271 MARINE TRANSMISSION Systems Operation
3412 INDUSTRIAL & MARINE ENGINES Crankshaft
7271 MARINE TRANSMISSION Oil Pump (9J7232)
7271 MARINE TRANSMISSION Oil Filter (2S6457)
7271 MARINE TRANSMISSION Control Valve (7L5392)
7271 MARINE TRANSMISSION Directional Clutches (3N6195, 3N6196)
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES Delco Remy
MIDLAND AIR COMPRESSORS EL-740 Air Compressor
MIDLAND AIR COMPRESSORS EL-1300/EL-1600 Air Compressors
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS Introduction
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS Primary Fuel Filter
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS Fuel Injection Lines (Double Walled)
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS Duplex Fuel Filters