Grapple Arm - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | QTY     |
A     | 154-6182     | Forcing Bolts     | 2     |
- Attach a suitable lifting device to grapple arm assembly (1). The weight of grapple arm assembly (1) is approximately 340 kg (750 lb).
Show/hide table
Illustration 1 | g02650716 |
- Remove bolts (2) .
Show/hide table
Illustration 2 | g02650717 |
- Use Tooling (A) in order to remove pin assembly (3) .
Show/hide table
Illustration 3 | g02650719 |
- Remove bolt (4) and pin assembly (5). Repostion cylinder (6) .
Show/hide table
Illustration 4 | g02650776 |
- Remove bolts (7). Remove grapple arm assembly (1) .
Show/hide table
Illustration 5 | g02650777 |
Caterpillar Information System:
Product Link - PL522/523 MID 161 - CID 1888 - FMI 14
773G and 775G Off-Highway Truck Cooling System Coolant (ELC) - Change
XQ125 Generator Set Product Installation
777G Off-Highway Truck Traction Control System (TCS) - Test
C27 Generator Set Product Storage
XQ125 Generator Set Electrical System
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Steering Check and Combiner Valve - Assemble
777G Off-Highway Truck Secondary Steering - Test
SH-56B Felling Head Felling Head Hydraulic Cylinder (Accumulator Arm) - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Steering Check and Combiner Valve - Disassemble
SH-56B Felling Head Felling Head Hydraulic Cylinder (Grapple Arm) - Remove and Install
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000} Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
773G and 775G Off-Highway Truck Cooling System Coolant Sample (Level 1) - Obtain
773G and 775G Off-Highway Truck Cooling System Coolant Sample (Level 2) - Obtain
XQ60 Rental Generator Set After Starting Engine
C175-16 Locomotive Engine Engine Oil Pressure Sensor
773G and 775G Off-Highway Truck Cooling System Pressure Cap - Clean/Replace
2570C and 2670C Wheel Feller Bunchers Monitoring System
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Exhaust Bellows - Remove and Install
773G and 775G Off-Highway Truck Cooling System Water Temperature Regulator - Replace
2012/12/24 Triple Flange Idler Available for Compact Track Loader {4159}
2011/11/08 The Breather for Steering Tank Is Now Relocated on 793F Off-Highway Trucks {5057}
SH-56B Felling Head Felling Head Accumulator Arm - Remove and Install
2013/03/08 Compact Track Loader Track Derailment Prevention and Repair Guidelines {4151}