Hydraulic Cylinder (Accumulator Arm) - Remove and Install
Removal Procedure
Start By:
- Remove grapple arm spring.
- Remove bolts (2) and guard (1) .
Show/hide table
 | |
| Illustration 1 | g02649340 |
- Disconnect hose assemblies (3) .
Show/hide table
 | |
| Illustration 2 | g02649759 |
- Attach a suitable lifting device to accumulator arm cylinder (4). The weight of accumulator arm cylinder (4) is approximately 36 kg (80 lb).
Show/hide table
 | |
| Illustration 3 | g02649761 |
- Remove retaining ring (5). Remove bolt (6) and pin assembly (7) .
Show/hide table
 | |
| Illustration 4 | g02649817 |
Show/hide table
 | |
| Illustration 5 | g02649819 |
- Remove bolt (8) and pin assembly (9). Remove accumulator arm cylinder (4) .
Show/hide table
 | |
| Illustration 6 | g02649822 |
Installation Procedure
- Install accumulator arm cylinder (4) in the reverse order of removal.
Caterpillar Information System:
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Steering Check and Combiner Valve - Disassemble
SH-56B Felling Head Felling Head Hydraulic Cylinder (Grapple Arm) - Remove and Install
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000} Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
SH-56B Felling Head Felling Head Piston Motor (Disc Saw) - Remove and Install
SH-56B Felling Head Felling Head Disc Saw - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Speed Sensor (Traction Control) - Remove and Install
SH-56B Felling Head Felling Head Disc Saw Tooth - Remove and Install
C175-16 Locomotive Engine Fuel Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C175-16 Locomotive Engine Crankcase Pressure Sensor
G3516H and G3520H Generator Set Engines Atmospheric Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
777G Off-Highway Truck Secondary Steering - Test
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Steering Check and Combiner Valve - Assemble
XQ125 Generator Set Electrical System
C27 Generator Set Product Storage
777G Off-Highway Truck Traction Control System (TCS) - Test
XQ125 Generator Set Product Installation
773G and 775G Off-Highway Truck Cooling System Coolant (ELC) - Change
Product Link - PL522/523 MID 161 - CID 1888 - FMI 14
SH-56B Felling Head Felling Head Grapple Arm - Remove
773G and 775G Off-Highway Truck Cooling System Coolant Sample (Level 1) - Obtain
773G and 775G Off-Highway Truck Cooling System Coolant Sample (Level 2) - Obtain
XQ60 Rental Generator Set After Starting Engine