Piston Motor (Disc Saw) - Remove and Install
Removal Procedure
- Remove bolts (1) and guard (2) .
Show/hide table
Illustration 1 | g02648957 |
- Remove bolts (3) and plate (4) .
Show/hide table
Illustration 2 | g02648976 |
- Remove bolts (5). Use two people in order to remove guard (6). The weight of guard (6) is approximately 34 kg (75 lb).
Show/hide table
Illustration 3 | g02649037 |
Show/hide table
Illustration 4 | g02648977 |
- Attach a suitable lifting device to piston motor (7). The weight of piston motor (7) is approximately 68 kg (150 lb).
Show/hide table
Illustration 5 | g02649036 |
- Remove bolts (8). Remove piston pump (7) .
Show/hide table
Illustration 6 | g02649057 |
Installation Procedure
- Install piston motor (7) in the reverse order of removal.
- Tighten bolts (8) to a torque of 360 ± 60 N·m (266 ± 44 lb ft).
Caterpillar Information System:
SH-56B Felling Head Felling Head Disc Saw - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Speed Sensor (Traction Control) - Remove and Install
SH-56B Felling Head Felling Head Disc Saw Tooth - Remove and Install
C175-16 Locomotive Engine Fuel Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C175-16 Locomotive Engine Crankcase Pressure Sensor
G3516H and G3520H Generator Set Engines Atmospheric Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
3516C Generator Set Engines Engine Speed/Timing Sensor
2011/09/14 The Mounting for Hoist Lines Group Is Now Improved on 777F Off-Highway Trucks {5057}
2011/07/26 A New Grommet and Thread Adhesive for Mirror Group Are Now Used on 773F and 777F Off-Highway Trucks and 775F Quarry Trucks {7319}
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Gear Pump (Hydraulic Fan) - Assemble
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000} Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
SH-56B Felling Head Felling Head Hydraulic Cylinder (Grapple Arm) - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Steering Check and Combiner Valve - Disassemble
SH-56B Felling Head Felling Head Hydraulic Cylinder (Accumulator Arm) - Remove and Install
777G Off-Highway Truck Secondary Steering - Test
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Steering Check and Combiner Valve - Assemble
XQ125 Generator Set Electrical System
C27 Generator Set Product Storage
777G Off-Highway Truck Traction Control System (TCS) - Test
XQ125 Generator Set Product Installation
773G and 775G Off-Highway Truck Cooling System Coolant (ELC) - Change
Product Link - PL522/523 MID 161 - CID 1888 - FMI 14