Product Installation
Perform the following procedure after the power module has been delivered.
- Inspect the power module for any internal damage or external damage that may have occurred during shipping.
- Open the generator controls compartment. Inspect the bus bar connections at the generator circuit breaker. Ensure that all electrical connections are properly tightened. If necessary, torque the connections.
- Ensure that all of the control relays are seated in the relay base. If a relay is not seated correctly, then carefully push the relay onto the base. Ensure that the clip that secures the relay is installed.
- Turn on the DC power. Ensure that all electronic devices are operating properly.
- Ensure that all operator interface devices work properly. Operator interface devices include switches, lights, and circuit breakers
- Verify that no shutdowns are active.
- Check the batteries for proper voltage level.
- Turn off the DC power.
Caterpillar Information System:
777G Off-Highway Truck Traction Control System (TCS) - Test
C27 Generator Set Product Storage
XQ125 Generator Set Electrical System
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Steering Check and Combiner Valve - Assemble
777G Off-Highway Truck Secondary Steering - Test
SH-56B Felling Head Felling Head Hydraulic Cylinder (Accumulator Arm) - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Steering Check and Combiner Valve - Disassemble
SH-56B Felling Head Felling Head Hydraulic Cylinder (Grapple Arm) - Remove and Install
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000} Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
SH-56B Felling Head Felling Head Piston Motor (Disc Saw) - Remove and Install
SH-56B Felling Head Felling Head Disc Saw - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Speed Sensor (Traction Control) - Remove and Install
773G and 775G Off-Highway Truck Cooling System Coolant (ELC) - Change
Product Link - PL522/523 MID 161 - CID 1888 - FMI 14
SH-56B Felling Head Felling Head Grapple Arm - Remove
773G and 775G Off-Highway Truck Cooling System Coolant Sample (Level 1) - Obtain
773G and 775G Off-Highway Truck Cooling System Coolant Sample (Level 2) - Obtain
XQ60 Rental Generator Set After Starting Engine
C175-16 Locomotive Engine Engine Oil Pressure Sensor
773G and 775G Off-Highway Truck Cooling System Pressure Cap - Clean/Replace
2570C and 2670C Wheel Feller Bunchers Monitoring System
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Exhaust Bellows - Remove and Install
773G and 775G Off-Highway Truck Cooling System Water Temperature Regulator - Replace
2012/12/24 Triple Flange Idler Available for Compact Track Loader {4159}