Product Storage
If the power module will not immediately be put into service, perform the following actions.
- Turn off all DC power at the disconnect switch.
- Do not disconnect cables attached to the batteries. Leaving the cables connected will allow the solar charging system to maintain the charge of batteries.
- Close all access panels.
- Close all the doors for the power module including the load cable access and customer interconnect access doors.
For more detailed information on engine storage, refer to Special Instruction, SEHS9031, "Storage Procedure for Caterpillar Products".
For information on generator storage, refer to Special Instructions, "Preservation Procedures and Practices for Extended Storage".
Caterpillar Information System:
XQ125 Generator Set Electrical System
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Steering Check and Combiner Valve - Assemble
777G Off-Highway Truck Secondary Steering - Test
SH-56B Felling Head Felling Head Hydraulic Cylinder (Accumulator Arm) - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Steering Check and Combiner Valve - Disassemble
SH-56B Felling Head Felling Head Hydraulic Cylinder (Grapple Arm) - Remove and Install
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000} Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
SH-56B Felling Head Felling Head Piston Motor (Disc Saw) - Remove and Install
SH-56B Felling Head Felling Head Disc Saw - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Speed Sensor (Traction Control) - Remove and Install
SH-56B Felling Head Felling Head Disc Saw Tooth - Remove and Install
C175-16 Locomotive Engine Fuel Pressure Sensor
777G Off-Highway Truck Traction Control System (TCS) - Test
XQ125 Generator Set Product Installation
773G and 775G Off-Highway Truck Cooling System Coolant (ELC) - Change
Product Link - PL522/523 MID 161 - CID 1888 - FMI 14
SH-56B Felling Head Felling Head Grapple Arm - Remove
773G and 775G Off-Highway Truck Cooling System Coolant Sample (Level 1) - Obtain
773G and 775G Off-Highway Truck Cooling System Coolant Sample (Level 2) - Obtain
XQ60 Rental Generator Set After Starting Engine
C175-16 Locomotive Engine Engine Oil Pressure Sensor
773G and 775G Off-Highway Truck Cooling System Pressure Cap - Clean/Replace
2570C and 2670C Wheel Feller Bunchers Monitoring System
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Exhaust Bellows - Remove and Install