Stopping the Engine if an Electrical Malfunction Occurs
Show/hide table
| |
| Illustration 1 | g02087913 |
Turn the engine start switch to the OFF position. If the engine does not stop, an electrical malfunction exists.
Use the emergency stop knob in order to stop the engine during an electrical malfunction. There is one emergency stop knob on the left-hand operator console and one emergency stop knob on the right-hand operator console.
Push the knob downward in order to stop the engine and the machine. In order to release the emergency stop, pull the knob upward.
Note: Some screeds contain an additional emergency stop knob. The emergency stop knob on the screed must be released before the engine can be started. See the Operation and Maintenance Manual for the attached screed for more information.
Caterpillar Information System:
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Auxiliary Power Panel - If Equipped
2010/08/13 A New Cotter Pin is Available for Certain M Series Motor Graders {6152, 6154, 6155}
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Final Drive and Wheel
2010/08/25 A New Routing Is Now Available for the Valve Harness Assembly (Seat Air Compressor) on Certain Caterpillar Machines {7312, 731S, 7324}
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Final Drive and Wheel
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Modulating Valve
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Hitch Drive Shaft
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Solenoid and Relief Valve (Output Transfer Gears)
Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120} Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120}
PF-300C and PS-300C Pneumatic Compactors Propel System Transmission
AP1000E, AP1055E, BG1000E and BG1055E Asphalt Pavers MID 156 - CID 0681 - FMI 06
AP1000E, AP1055E, BG1000E and BG1055E Asphalt Pavers MID 156 - CID 0681 - FMI 05
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Leaving the Machine
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Machine Cleanup Procedure
AP1000F Asphalt Paver Shipping the Machine
C15 and C18 Tier 4 Final Engines Electronic Control System Components
Transmission Bevel Pinion and Transfer Gear for D5, D6, D7, D8, and D9 Tractors with Oval Tracks{1164, 3030, 3159, 3254} Transmission Bevel Pinion and Transfer Gear for D5, D6, D7, D8, and D9 Tractors with Oval Tracks{1164, 3030, 3159, 3254}
2010/09/15 Engine Oil Pump for C6.6 Machine Engines {1304, 1315}
C3.4B Engines System Overview
777G Off-Highway Truck VIMSTM 3G and Payload MID 161 - CID 0590 - FMI 09
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload General Information
777G Off-Highway Truck VIMSTM 3G and Payload Event Code List
777G Off-Highway Truck VIMSTM 3G and Payload Menu Contents
777G Off-Highway Truck VIMSTM 3G and Payload System Schematic