Hitch Drive Shaft
Show/hide table
 | |
| 图 1 | g02238117 |
(1) 8 条螺栓的扭矩 ... 135 ± 20 N·m (100 ± 15 lb ft)
(2) 8 条螺栓的扭矩 ... 135 ± 20 N·m (100 ± 15 lb ft)
(3) 将润滑脂堆进油室的 1/3 以润滑密封唇。 使用 5P-0960 Molybdenum 润滑脂 。
(4) 159-1074 托架
(5) 安装时使用润滑脂润滑花键的底部。
(6) 213-3409 法兰
注: 将 4C-5592 防咬合剂 涂抹到螺纹上。
(7) 146-2985 锁片
(8) 3条螺栓的扭矩 ... 240 ± 20 N·m (175 ± 15 lb ft)
(9) 9 条螺栓的扭矩 ... 240 ± 20 N·m (175 ± 15 lb ft)
注: 设定 9 条螺栓 (9) 的扭矩之前，回调法兰 (6) 。 该步骤将确保托架 (4) 和铰接组件的后表面之间完全接触。 拧紧螺母 (9) 。 调整法兰以便有 0.15 ± 0.4 mm (0.0059 ± 0.0157 in) 的端部浮动。 安装锁紧锁片 (7) 和 3 条螺栓 (8) 。
Caterpillar Information System:
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Solenoid and Relief Valve (Output Transfer Gears)
Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120} Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120}
PF-300C and PS-300C Pneumatic Compactors Propel System Transmission
AP1000E, AP1055E, BG1000E and BG1055E Asphalt Pavers MID 156 - CID 0681 - FMI 06
AP1000E, AP1055E, BG1000E and BG1055E Asphalt Pavers MID 156 - CID 0681 - FMI 05
AP1000E, AP1055E, BG1000E and BG1055E Asphalt Pavers MID 156 - CID 0681 - FMI 03
730E Ejector Tailgate Pivot Modification{7271} 730E Ejector Tailgate Pivot Modification{7271}
2010/09/09 The C - Series Skid Steer Loaders, Multi Terrain Loaders, and Compact Track Loaders are now Grade Control Ready {1408}
Procedure to Replace Starter Cable Assembly on Certain Motor Graders{1408} Procedure to Replace Starter Cable Assembly on Certain Motor Graders{1408}
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Main Drive Shaft
2470C, 2570C and 2670C Wheel Feller Bunchers Machine Systems Breaker Relief Valve (Hydraulic Tank)
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Rear Drive Shaft
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Modulating Valve
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Final Drive and Wheel
2010/08/25 A New Routing Is Now Available for the Valve Harness Assembly (Seat Air Compressor) on Certain Caterpillar Machines {7312, 731S, 7324}
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Final Drive and Wheel
2010/08/13 A New Cotter Pin is Available for Certain M Series Motor Graders {6152, 6154, 6155}
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Auxiliary Power Panel - If Equipped
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Stopping the Engine if an Electrical Malfunction Occurs
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Leaving the Machine
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Machine Cleanup Procedure
AP1000F Asphalt Paver Shipping the Machine
C15 and C18 Tier 4 Final Engines Electronic Control System Components
Transmission Bevel Pinion and Transfer Gear for D5, D6, D7, D8, and D9 Tractors with Oval Tracks{1164, 3030, 3159, 3254} Transmission Bevel Pinion and Transfer Gear for D5, D6, D7, D8, and D9 Tractors with Oval Tracks{1164, 3030, 3159, 3254}