AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Caterpillar


Machine Cleanup Procedure

Usage:

AP-1000E DKH

------ WARNING! ------

熨平板可能会掉落。 为避免可能的人身伤害,熨平板升起时要伸出熨平板行驶锁。


注: 查看作业地点所在地区在清洁剂和溶剂使用方面的地方法规。




图 1g01372075

沥青摊铺机配备了喷洒软管和软管卷筒 (1) 。 喷洒软管位于熨平板的操作员平台,如图所示。 喷洒软管用于清除螺旋布料器、输送带和熨平板区域的沥青。

  1. 将机器停放在水平地面上。 机器应停放在远离沥青铺层的区域。 如果必须将机器停放在坡面上,则应塞牢履带。

  1. 将冲洗泵开关移到喷洒位置。

    注: 熨平板燃油泵开关位于熨平板右侧的操作员控制面板上。

    注: 泵将在 15 分钟后自动断开,除非在监控系统中修改了时间。

  1. 拉触发开关以开始喷洒。 松开触发开关,以停止喷洒。

  1. 清洁摊铺机推送支重轮和拖拽输送机的整条输送机传动链条和条板。 向整个拖拽输送机喷洒清洁溶液。 喷洒整个螺旋钻输送机以清洁和润滑螺旋钻。 清洁熨平板的前部和底部。 清洁料斗区域。

  1. 将熨平板燃油泵开关移到断开位置。

  1. 将喷洒软管收回卷筒。

Caterpillar Information System:

AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Leaving the Machine
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Stopping the Engine if an Electrical Malfunction Occurs
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Auxiliary Power Panel - If Equipped
2010/08/13 A New Cotter Pin is Available for Certain M Series Motor Graders {6152, 6154, 6155}
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Final Drive and Wheel
2010/08/25 A New Routing Is Now Available for the Valve Harness Assembly (Seat Air Compressor) on Certain Caterpillar Machines {7312, 731S, 7324}
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Final Drive and Wheel
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Modulating Valve
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Hitch Drive Shaft
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Solenoid and Relief Valve (Output Transfer Gears)
Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120} Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120}
PF-300C and PS-300C Pneumatic Compactors Propel System Transmission
AP1000F Asphalt Paver Shipping the Machine
C15 and C18 Tier 4 Final Engines Electronic Control System Components
Transmission Bevel Pinion and Transfer Gear for D5, D6, D7, D8, and D9 Tractors with Oval Tracks{1164, 3030, 3159, 3254} Transmission Bevel Pinion and Transfer Gear for D5, D6, D7, D8, and D9 Tractors with Oval Tracks{1164, 3030, 3159, 3254}
2010/09/15 Engine Oil Pump for C6.6 Machine Engines {1304, 1315}
C3.4B Engines System Overview
777G Off-Highway Truck VIMSTM 3G and Payload MID 161 - CID 0590 - FMI 09
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload General Information
777G Off-Highway Truck VIMSTM 3G and Payload Event Code List
777G Off-Highway Truck VIMSTM 3G and Payload Menu Contents
777G Off-Highway Truck VIMSTM 3G and Payload System Schematic
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload Maximum Payload Speed Manager
777G Off-Highway Truck VIMSTM 3G and Payload Display Modules
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.