2010/09/15 Caterpillar


Engine Oil Pump for C6.6 Machine Engines {1304, 1315}

Usage:

BG655D B5D
Asphalt Paver:
AP600D (S/N: TFM1-UP; TFZ1-UP)
AP655D (S/N: GNN1-UP)
AP655D (S/N: MAN1-UP)
AP655D (S/N: MAT1-UP)
AP655D (S/N: GNZ1-UP)
BG600D (S/N: B6K1-UP)
BG655D (S/N: BPA1-UP; B5D1-UP)
Excavator:
M316D (S/N: W6A1-UP)
M318D (S/N: W8P1-UP; W8R1-UP)
M322D (S/N: W2S1-UP; W2T1-UP)
Integrated Toolcarrier:
IT38H (S/N: JNJ1-UP)
Load Haul Dump:
R1300GSeries II (S/N: RSL1-UP)
Motor Grader:
120M (S/N: B9C1-UP; NJD1-UP; B9N1-UP; CBS1-UP; B9W1-UP; D9W1-UP)
12M (S/N: B9F1-UP; B9R1-UP)
Pipelayer:
PL61 (S/N: WGS1-UP)
Vibratory Soil Compactor:
CP56 (S/N: C5P1-UP; FCP1-UP)
CP64 (S/N: P7F1-UP; C6P1-UP)
CP74 (S/N: P8F1-UP; C8P1-UP)
CP76 (S/N: C7L1-UP; JCP1-UP)
CS56 (S/N: JMM1-UP; C5S1-UP; FCS1-UP)
CS64 (S/N: C7F1-UP; C6S1-UP)
CS74 (S/N: C8F1-UP; C8S1-UP)
CS76 (S/N: JCS1-UP; CYX1-UP)
Track-Type Loader:
953D (S/N: LBP1-UP)
963D (S/N: LCS1-UP)
Track-Type Tractor:
D6K (S/N: DHA1-UP; NCF1-UP; HMG1-UP; FBH1-UP)
D6N (S/N: DJA1-UP; JAH1-UP; LJR1-UP; GHS1-UP; MLW1-UP; DJY1-UP)
Wheel Loader:
924H (S/N: HXC1-UP; JTM1-UP; KLN1-UP)
924HZ (S/N: RCB1-UP; WLB1-UP; PED1-UP; BEF1-UP)
928H (S/N: RSB1-UP)
928HZ (S/N: BYD1-UP; CXK1-UP)
930H (S/N: DHC1-UP; FTD1-UP)
938H (S/N: MCC1-UP; MJC1-UP; JKM1-UP; LKM1-UP)
Wheel Tractor-Scraper:
613G (S/N: ESB1-UP; DBE1-UP)

Description of Change:




Illustration 1g02214073

Typical example




Illustration 2g02214074

Typical example

Engine oil pump (1) has replaced engine oil pump (4). Engine oil pump (1) has M6 screws (3). Engine oil pump (4) has M8 screws (6) .

Adaptable To: 312-4545 Oil Pump was introduced from engine serial number C6E02944.

312-4545 Oil Pump (1) has replaced 293-5250 Oil Pump As (4) .

For 312-4545 Oil Pump (1), tighten screws (3) to a torque of 9.5 N·m (84 lb in). Tighten screws (2) to a torque of 22 N·m (16 lb ft).

For 293-5250 Oil Pump (4), tighten screws (6) to a torque of 9.5 N·m (84 lb in). Tighten screws (5) to a torque of 22 N·m (16 lb ft).

For the correct procedure to install the engine oil pump, refer to Disassembly and Assembly, "Engine Oil Pump - Install".

Caterpillar Information System:

Transmission Bevel Pinion and Transfer Gear for D5, D6, D7, D8, and D9 Tractors with Oval Tracks{1164, 3030, 3159, 3254} Transmission Bevel Pinion and Transfer Gear for D5, D6, D7, D8, and D9 Tractors with Oval Tracks{1164, 3030, 3159, 3254}
C15 and C18 Tier 4 Final Engines Electronic Control System Components
AP1000F Asphalt Paver Shipping the Machine
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Machine Cleanup Procedure
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Leaving the Machine
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Stopping the Engine if an Electrical Malfunction Occurs
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Auxiliary Power Panel - If Equipped
2010/08/13 A New Cotter Pin is Available for Certain M Series Motor Graders {6152, 6154, 6155}
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Final Drive and Wheel
2010/08/25 A New Routing Is Now Available for the Valve Harness Assembly (Seat Air Compressor) on Certain Caterpillar Machines {7312, 731S, 7324}
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Final Drive and Wheel
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Modulating Valve
C3.4B Engines System Overview
777G Off-Highway Truck VIMSTM 3G and Payload MID 161 - CID 0590 - FMI 09
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload General Information
777G Off-Highway Truck VIMSTM 3G and Payload Event Code List
777G Off-Highway Truck VIMSTM 3G and Payload Menu Contents
777G Off-Highway Truck VIMSTM 3G and Payload System Schematic
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload Maximum Payload Speed Manager
777G Off-Highway Truck VIMSTM 3G and Payload Display Modules
777G Off-Highway Truck VIMSTM 3G and Payload Diagnostic Code List
777G Off-Highway Truck VIMSTM 3G and Payload Payload System - Configure
777G Off-Highway Truck VIMSTM 3G and Payload MID 162 - CID 0839 - FMI 04
777G Off-Highway Truck VIMSTM 3G and Payload MID 162 - CID 0839 - FMI 03
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.