Piston Motor (Hydrostatic)
Show/hide table
 | |
| Illustration 1 | g03773658 |
Show/hide table
| Specification for 280-7854 Piston Motor Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 6 | 289-6347 Bolt | Torque to 150 ± 5 N·m (111 ± 4 lb ft). |
| 2 | 12 | 5C-7883 Bolt | Torque to 15 ± 1 N·m (133 ± 9 lb in). |
| 3 | Thickness of the brake pack (C) is 28.20 ± 0.10 mm (1.110 ± 0.004 inch). Clamp the brake plates while you measure the brake pack. As required, use the following shims in order to achieve the dimension (C) : |
||
| 1 | 140-2513 Shim | Thickness of shim is 0.10 mm (0.004 inch). |
|
| 2 | 140-2514 Shim | Thickness of shim is 0.3 mm (0.012 inch). |
|
| 4 | 5 | 8T-0271 Bolt | Torque to 73.5 ± 4.0 N·m (54.2 ± 3.0 lb ft). |
| 5 | 1 | 9S-8005 O-Ring Plug | Torque to 70.0 ± 3.5 N·m (51.6 ± 2.6 lb ft). |
| 6 | 1 | 216-6124 Plug | Torque to 37.5 ± 2.5 N·m (27.7 ± 1.8 lb ft). |
| 7 | 1 | 222-5693 O-Ring Plug | Torque to 25.0 ± 1.5 N·m (221.3 ± 13.3 lb in). |
Caterpillar Information System:
Product Link - PL522/523 General Information
797 and 797B Off-Highway Truck/Tractors Braking System Retarder Function
Product Link - PL522/523 Commands
Product Link - PL522/523 Spare Input Configure
Product Link - PL522/523 Installation Parameters Configure
C27 and C32 Engines for Caterpillar Built Machines Aftercooler - Test - If Equipped
2010/07/02 New Bolts Are Available for the Clutch Disc Inside the Torque Converter on Large Wheel Loaders, Landfill Compactors, and Wheel Dozers {3101}
C7.1 Industrial Engine and Generator Set ARD Failed to Ignite
16M Series 3 and 18M Series 3 Motor Grader Steering System - Purge
C15 and C18 Tier 4 Final Engines Engine Oil Pressure - Test
C9.3 Engines for Caterpillar Built Machines Sensor Calibration Required - Test
Product Link - PL522/523 Configuration
C13, C15, and C18 Tier 4 Interim Engines Exhaust Balance Valve - Test
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Piston Motor (Hydrostatic)
795F AC Off-Highway Truck Automatic Lubrication System (For Electric Start Equipped Trucks) Automatic Lubrication System Troubleshooting
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D and 793F Off-Highway Truck Automatic Lubrication System Automatic Lubrication System Troubleshooting
C7 Engines for Caterpillar Built Machines Muffler
777G Off-Highway Truck/Tractor Braking System MID 116 - CID 0607 - FMI 02
777G Off-Highway Truck/Tractor Braking System MID 116 - CID 0608 - FMI 02
2010/07/02 An Improved Drive Shaft Guard Group is Now Used on the 797F Off-Highway Truck {7150, 7153}
777G Off-Highway Truck/Tractor Braking System MID 116 - CID 1013 - FMI 06
795F AC Off-Highway Truck Automatic Lubrication System (For Air Start Equipped Trucks) General Information
Product Link - PL522/523 Service Tools
Product Link - PL522/523 Diagnostic Capabilities