A New Tube Updates the Water Lines Group for the High Altitude Machine Arrangement {1380}
- Off-Highway Truck:
- 797 (S/N: 5YW1-UP)
- 797B (S/N: JSM1-UP)
Description of Change: The new tube is 208 mm (8.2 inch) long. The former tube was 203 mm (7.8 inch). The new, longer tube will help reduce the potential for coolant leaks at the tube joints.
Adaptable To:
Show/hide table
Illustration 1 | g01841640 |
The rear engine arrangement |
Show/hide table
Illustration 2 | g01841642 |
View (A-A) |
Show/hide table
Parts needed to Update the 166-5056 Water Lines Gp .     | |||
Item     | Qty     | Part Number     | Description     |
1     | 1     | 338-2549     | Tube     |
2     | 2     | 8T-1919     | O-Ring Seals     |
3     | 2     | 6J-2680     | O-Ring Seals     |
The new 338-2549 Tube (1) is adaptable to machines 5YW1-UP and JSM1-368.
The new 338-2549 Tube (1) became effective in production with the machine JSM369-UP. Use the parts that are listed in Table 1 in order to update earlier machines to the new tube.
Caterpillar Information System:
795F AC and 795F AC XQ Off-Highway Trucks Inverter Cabinet - Check/Clean
3408E and 3412E Engines for Caterpillar Built Machines Event Codes
SystemOne Tool Reference {0729, 4150} SystemOne Tool Reference {0729, 4150}
583T Pipelayer Alternate Exit
587R Pipelayer Alternate Exit
587T Pipelayer Alternate Exit
CP44 and CS44 Vibratory Soil Compactors Tire Inflation - Check
AccuGrade® GPS v11 for CD700 Blade Pitch Sensor - Calibrate
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Pump Drive - PTO
2009/03/23 Correction to Troubleshooting Testing and Adjusting , "Differential Backlash and Bearings - Adjust" {3258}
MINEGEM Machine Control ; Guidance Products Machine Automation System Machine Preparation for Troubleshooting
2009/03/23 Correction to Disassembly and Assembly , "Differential and Bevel Gear - Install" {3256, 3258}
2009/03/23 The Manufacturing Process for the Slip Joint Group is Updated {3253}
2009/03/02 Inspection and the Repair Procedure for the Hoist Tube In the Frame Assembly Is Available {7050, 7050}
2009/03/30 Special Instruction , "797B Off-Highway Truck Assembly Procedure" Has Been Updated {7000, 7006, 7960}
MINEGEM Machine Control ; Guidance Products Machine Automation System Wiring Harness (Open Circuit) - Test
MINEGEM Machine Control ; Guidance Products Local Area Radio Network Wiring Harness (Short Circuit) - Test
MINEGEM Machine Control ; Guidance Products Area Isolation System General Information
MINEGEM Machine Control ; Guidance Products Local Area Radio Network Using the Operator Monitor to Determine Diagnostic Codes
MINEGEM Machine Control ; Guidance Products Machine Automation System Service Tools
CD54 Vibratory Compactor Machine Systems Water Spray Pump
584 and 584HD Forwarders Operator Controls
795F AC and 795F AC XQ Off-Highway Trucks Electric Cable - Check - High Voltage Harness
3408E and 3412E Engines for Caterpillar Built Machines System Overview