725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Caterpillar


Pump Drive - PTO

Usage:

730C2 2L7


图 1g03523338
后视图

表 1
技术规格 - 299-2467 泵驱动总成 
项目  数量  零件  技术规格说明 
2K-2939 O 形密封圈  用密封的润滑剂稍稍润滑孔。 
140-7544 垫片组  根据需要,使用以下垫片组(包含 12 个垫片),以便将泵适配器 (3) 的端隙调整至 0.10 to 0.20 mm (0.004 to 0.008 inch): 
一个垫片组的总厚度为 1.37 mm (0.054 inch)
4 垫片垫片组中每个垫片的厚度为 0.05 mm (0.002 inch)
5 垫片垫片组中每个垫片的厚度为 0.12 mm (0.005 inch)
2 垫片垫片组中每个垫片的厚度为 0.40 mm (0.016 inch)
一个垫片的厚度为 0.80 mm (0.031 inch)

Caterpillar Information System:

2009/03/23 Correction to Troubleshooting Testing and Adjusting , "Differential Backlash and Bearings - Adjust" {3258}
MINEGEM Machine Control ; Guidance Products Machine Automation System Machine Preparation for Troubleshooting
2009/03/23 Correction to Disassembly and Assembly , "Differential and Bevel Gear - Install" {3256, 3258}
2009/05/04 New Fuel Lines are Now Used for the Transfer Pump {1274}
2009/03/23 Correction to Disassembly and Assembly , "Differentials and Pinion Assemblies" {3258}
793F and 797F Off-Highway Trucks Power Train Electronic Control System Diagnostic Capabilities
Work Tool (Custom) and 343-8734 Fusion Pallet Fork Specifications
CP44 and CS44 Vibratory Soil Compactors Tire Inflation Pressure Adjustment
CP44 and CS44 Vibratory Soil Compactors Tire Shipping Pressure
2010/04/22 The Tube Assembly and Mounting from the Brake and Fan Drive Pump to the Valve Has Been Improved {1374, 1386, 5057}
2009/07/06 New Fan Guard and Shroud Is Now Used. {1356}
CP44 and CS44 Vibratory Soil Compactors Operation Information
AccuGrade® GPS v11 for CD700 Blade Pitch Sensor - Calibrate
CP44 and CS44 Vibratory Soil Compactors Tire Inflation - Check
587T Pipelayer Alternate Exit
587R Pipelayer Alternate Exit
583T Pipelayer Alternate Exit
SystemOne Tool Reference {0729, 4150} SystemOne Tool Reference {0729, 4150}
3408E and 3412E Engines for Caterpillar Built Machines Event Codes
795F AC and 795F AC XQ Off-Highway Trucks Inverter Cabinet - Check/Clean
2009/03/09 A New Tube Updates the Water Lines Group for the High Altitude Machine Arrangement {1380}
2009/03/23 The Manufacturing Process for the Slip Joint Group is Updated {3253}
2009/03/02 Inspection and the Repair Procedure for the Hoist Tube In the Frame Assembly Is Available {7050, 7050}
2009/03/30 Special Instruction , "797B Off-Highway Truck Assembly Procedure" Has Been Updated {7000, 7006, 7960}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.