Component Location
Block Diagram of Electronic Governor
Show/hide table
| |
| Illustration 1 | g01596177 |
|
Typical schematic | |
Show/hide table
| |
| Illustration 2 | g01595935 |
|
Typical schematic | |
Show/hide table
| |
| Illustration 3 | g01206909 |
|
Typical schematic | |
Location of the 3512C Engine Sensors
Show/hide table
| |
| Illustration 4 | g01611682 |
|
Left side engine view (typical example) (1) Engine coolant temperature sensor (2) Left turbocharger inlet pressure sensor (3) Left exhaust temperature sensor (4) Engine speed/timing sensor (5) Fuel filter differential pressure switch (6) Unfiltered engine oil pressure sensor (7) Low oil level switch (8) Filtered engine oil pressure sensor | |
Show/hide table
| |
| Illustration 5 | g01611753 |
|
Right side engine view (typical example) (9) Inlet manifold temperature sensor (10) Right exhaust temperature sensor (11) Right turbocharger inlet pressure sensor (12) Connection for the fan solenoid (13) Atmospheric pressure sensor (14) Crankcase pressure sensor (15) Engine coolant flow switch (16) Engine speed/timing calibration connector | |
Show/hide table
| |
| Illustration 6 | g01611773 |
|
Front view (typical example) (17) Turbocharger outlet pressure sensor (boost) (18) Connection for the fan speed sensor (19) Connection for the prelube (20) ECM | |
Caterpillar Information System:
3512C Engine and 785D Off-Highway Truck/Tractors System Overview
785D OEM Off-Highway Truck Machine Systems Check Valve (Rear Air/Hydraulic Cylinder) - Remove and Install
785D OEM Off-Highway Truck Machine Systems Check Valve (Front Air/Hydraulic Cylinder) - Remove and Install
785D OEM Off-Highway Truck Machine Systems Brake Tank (Makeup) - Remove and Install
MINEGEM Machine Control ; Guidance Products Circuit Breakers - Reset - R1300G LJB
R1300G Load Haul Dump Braking System Pressure Sensor (Transmission Oil)
793F Off-Highway Truck Rollover Protective Structure (ROPS) - Inspect
1390 Track Feller Buncher Operational Checks
PL61 Pipelayer Machine Systems Winch - Assemble - Boom
785D OEM Off-Highway Truck Machine Systems Slack Adjuster - Assemble
785D OEM Off-Highway Truck Machine Systems Slack Adjuster - Disassemble
785D OEM Off-Highway Truck Machine Systems Slack Adjuster (Rear) - Install
422E and 428E Backhoe Loaders Before Roading the Machine
C175-16 and C175-20 Engines for Caterpillar Built Machines Idler Gears (Front) - Remove and Install
2008/07/07 Improved Links Are Available For Certain Thumbs {6513, 6547}
2008/08/25 Improved K110 Adapters are now available for Wheel Loaders and Excavators {6800}
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems Swing Motor Relief Valve Pressure - Test and Adjust
Remote Forward, Neutral, and Reverse Switch May Not Operate Correctly{3065, 7332} Remote Forward, Neutral, and Reverse Switch May Not Operate Correctly{3065, 7332}
AP600D Asphalt Paver Machine Systems General Information (Generator System)
AP600D Asphalt Paver Machine Systems Hydraulic Schematic (Generator System)
2008/07/21 Improvements Have Been Made to the Caterpillar Monitoring System {7450, 7451, 7490}
AP600D Asphalt Paver Machine Systems Operator Controls (Generator)
320D and 323D Excavators Machine System Specifications Accumulator (Pilot)
PL61 Pipelayer Machine Systems Hook Winch - Disassemble