Pressure Sensor (Transmission Oil)
Show/hide table
 | |
| Illustration 1 | g00941744 |
(1) Torque for the sensor ... 10 ± 2 N·m (88 ± 18 lb in)
(A) Voltage supply pin.
- Operating supply voltage range ... 18 to 32 Volts DC
(B) Ground pin.
(C) Signal pin.
Pressure range - absolute ... 0 to 5871 kPa (0 to 850 psi)
Operating temperature range ... −40° to +120°C (−40° to +215°F)
Caterpillar Information System:
793F Off-Highway Truck Rollover Protective Structure (ROPS) - Inspect
1390 Track Feller Buncher Operational Checks
PL61 Pipelayer Machine Systems Winch - Assemble - Boom
785D OEM Off-Highway Truck Machine Systems Slack Adjuster - Assemble
785D OEM Off-Highway Truck Machine Systems Slack Adjuster - Disassemble
785D OEM Off-Highway Truck Machine Systems Slack Adjuster (Rear) - Install
785D OEM Off-Highway Truck Machine Systems Slack Adjuster (Rear) - Remove
785D OEM Off-Highway Truck Machine Systems Slack Adjuster (Front) - Install
785D OEM Off-Highway Truck Machine Systems Slack Adjuster (Front) - Remove
CAES Weight for Density Report - Office Weight
PL61 Pipelayer Machine Systems Winch - Disassemble - Boom
785D OEM Off-Highway Truck Machine Systems Air/Hydraulic Cylinder (Brake) - Assemble
MINEGEM Machine Control ; Guidance Products Circuit Breakers - Reset - R1300G LJB
785D OEM Off-Highway Truck Machine Systems Brake Tank (Makeup) - Remove and Install
785D OEM Off-Highway Truck Machine Systems Check Valve (Front Air/Hydraulic Cylinder) - Remove and Install
785D OEM Off-Highway Truck Machine Systems Check Valve (Rear Air/Hydraulic Cylinder) - Remove and Install
3512C Engine and 785D Off-Highway Truck/Tractors System Overview
3512C Engine and 785D Off-Highway Truck/Tractors Component Location
422E and 428E Backhoe Loaders Before Roading the Machine
C175-16 and C175-20 Engines for Caterpillar Built Machines Idler Gears (Front) - Remove and Install
2008/07/07 Improved Links Are Available For Certain Thumbs {6513, 6547}
2008/08/25 Improved K110 Adapters are now available for Wheel Loaders and Excavators {6800}
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems Swing Motor Relief Valve Pressure - Test and Adjust
Remote Forward, Neutral, and Reverse Switch May Not Operate Correctly{3065, 7332} Remote Forward, Neutral, and Reverse Switch May Not Operate Correctly{3065, 7332}