Circuit Breakers - Reset - R1300G LJB
Show/hide table
| NOTICE |
|---|
Replace circuit breakers with the same type and size only. Otherwise, electrical damage can result. If it is necessary to reset circuit breakers frequently, an electrical problem may exist. Contact your Caterpillar dealer. |
- Enter the operations area.
ReferenceFor the procedure to enter the operations area, refer to the Operation and Maintenance Manual, "Machine Isolating for Maintenance".
Show/hide table
| Circuit Breakers - Depress the button to reset the circuit breaker. If the electrical system is working properly, the button will remain depressed. If the button does not remain depressed, check the appropriate electrical circuit. Repair the electrical circuit, if necessary. |
Show/hide table
 | |
| Illustration 1 | g01595453 |
The circuit breaker plate is located on the engine at the left side rear of the machine.
Show/hide table
 | |
| Illustration 2 | g01596613 |
(1) 15 Amp - Area Isolation System (AIS) Receiver Control circuit breaker.
(2) 15 Amp - Machine Automation System (MAS) circuit breaker.
Caterpillar Information System:
R1300G Load Haul Dump Braking System Pressure Sensor (Transmission Oil)
793F Off-Highway Truck Rollover Protective Structure (ROPS) - Inspect
1390 Track Feller Buncher Operational Checks
PL61 Pipelayer Machine Systems Winch - Assemble - Boom
785D OEM Off-Highway Truck Machine Systems Slack Adjuster - Assemble
785D OEM Off-Highway Truck Machine Systems Slack Adjuster - Disassemble
785D OEM Off-Highway Truck Machine Systems Slack Adjuster (Rear) - Install
785D OEM Off-Highway Truck Machine Systems Slack Adjuster (Rear) - Remove
785D OEM Off-Highway Truck Machine Systems Slack Adjuster (Front) - Install
785D OEM Off-Highway Truck Machine Systems Slack Adjuster (Front) - Remove
CAES Weight for Density Report - Office Weight
PL61 Pipelayer Machine Systems Winch - Disassemble - Boom
785D OEM Off-Highway Truck Machine Systems Brake Tank (Makeup) - Remove and Install
785D OEM Off-Highway Truck Machine Systems Check Valve (Front Air/Hydraulic Cylinder) - Remove and Install
785D OEM Off-Highway Truck Machine Systems Check Valve (Rear Air/Hydraulic Cylinder) - Remove and Install
3512C Engine and 785D Off-Highway Truck/Tractors System Overview
3512C Engine and 785D Off-Highway Truck/Tractors Component Location
422E and 428E Backhoe Loaders Before Roading the Machine
C175-16 and C175-20 Engines for Caterpillar Built Machines Idler Gears (Front) - Remove and Install
2008/07/07 Improved Links Are Available For Certain Thumbs {6513, 6547}
2008/08/25 Improved K110 Adapters are now available for Wheel Loaders and Excavators {6800}
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems Swing Motor Relief Valve Pressure - Test and Adjust
Remote Forward, Neutral, and Reverse Switch May Not Operate Correctly{3065, 7332} Remote Forward, Neutral, and Reverse Switch May Not Operate Correctly{3065, 7332}
AP600D Asphalt Paver Machine Systems General Information (Generator System)