Piston Motor (Propel) - Disassemble
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 136-1452 | Retaining Ring Pliers As | 1 |
Start By:
- Remove the piston motor. Refer to Disassembly and Assembly, "Piston Motor (Propel) - Remove".
- Remove bolts (1) and head (2).
Show/hide table
Illustration 2 g01181032 - Remove gasket (3).
Show/hide table
Illustration 3 g01181033 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove plug (4).
- Remove plug (5).
Show/hide table
Illustration 4 g01181034 - Remove spring (8) and retainer (7).
- Remove spool (6).
- Repeat Step 4 through Step 5 for the opposite side.
Show/hide table
Illustration 5 g01181035 - Remove bolts (9) and cover (10).
Show/hide table
Illustration 6 g01181036 - Remove O-ring seals (11) and piston (12).
Show/hide table
Illustration 7 g01181037 - Remove plate (13).
Show/hide table
Illustration 8 g01181038 - Remove port plate (14), bearing (15), and barrel (16).
Show/hide table
Illustration 9 g01181039 - Remove spider assembly (17).
Show/hide table
Illustration 10 g01181040 - Remove pins (18) and bearings (19).
Show/hide table
Illustration 11 g01181041 - Use Tooling (A) in order to remove retaining ring (20).
- Remove cover (21).
Show/hide table
Illustration 12 g01181042 - Remove seal (22).
Show/hide table
Illustration 13 g01181043 - Remove O-ring seal (23).
- Use Tooling (A) in order to remove retaining ring (24).
- Remove bolts (26) and housing (25).
Show/hide table
Illustration 14 g01181045 - Remove gasket (27).
- Use Tooling (A) in order to remove retaining ring (28).
- Remove spacer (29).
Show/hide table
Illustration 15 g01181046 - Use a suitable press in order to remove rotating group (30) from housing (31).
Note: Do not allow the rotating group to drop.
Show/hide table
Illustration 1 | g01181031 |
Caterpillar Information System:
432E, 434E, 442E and 444E Backhoe Loaders Specifications
793F Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging) - Disassemble
3512C Engine and 785D Off-Highway Truck/Tractors Diagnostic Trouble Codes
432E, 434E, 442E and 444E Backhoe Loaders Rated Load
AS4251C Asphalt Screed Shoe (End Gate) - Remove and Install
AS4251C Asphalt Screed Screed Frame (Extender) - Remove and Install
2008/05/19 A New Gasket is Available for Mounting of the Air Starting Motor {1451, 7555}
AP600D Asphalt Paver Propel System Piston Pump Neutral - Test and Adjust
422E and 428E Backhoe Loaders Swing Lock Pin Control
422E and 428E Backhoe Loaders Work Tool Flow Control - If Equipped
24M Motor Grader Power Train Rear Axle, Differential and Final Drive - Install
24M Motor Grader Power Train Rear Axle, Differential and Final Drive - Remove
AP555E and BG555E Asphalt Pavers Machine Systems Piston Motor (Propel) - Assemble
AP600D and BG600D Asphalt Pavers Machine Systems Piston Motor (Front Wheel Assist) - Remove
AP600D and BG600D Asphalt Pavers Machine Systems Piston Motor (Front Wheel Assist) - Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Control Console
432E, 434E, 442E and 444E Backhoe Loaders Operator Controls
RM-300 Reclaimer Mixer Machine Systems Electrical System (Water and Additive Spray)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Electrical System (Water and Additive Spray)
RM-300 Reclaimer Mixer Machine Systems Operator Controls (Water and Additive Spray System) - Modes of Operation
2290 Track Feller Buncher, 2390 Track Feller Buncher, 2391 Track Feller Buncher and 2491 Track Feller Buncher Machine Systems General Information
2290 Track Feller Buncher, 2390 Track Feller Buncher, 2391 Track Feller Buncher and 2491 Track Feller Buncher Machine Systems Piston Pump (Main Hydraulic)
2290 Track Feller Buncher, 2390 Track Feller Buncher, 2391 Track Feller Buncher and 2491 Track Feller Buncher Machine Systems Control Valve (Main)
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders Power Train Piston Motor (Hydrostatic) - Install