Rear Axle, Differential and Final Drive - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 1P-7405     | 吊环螺栓     | 1     |
B     | 189-0863     | 钩环组件     | 2     |
C     | 138-7574     | 连杆支架     | 4     |
D     | 309-2793     | 负载平衡装置     | 1     |
开始:
- 拆下裂土器。 请参阅拆解和装配, "裂土器 - 拆卸"。
- 拆下纵列传动箱。 请参阅拆解和装配, "纵列传动箱和盖板 - 拆卸和安装"。
- 拆下万向节。 请参阅拆解和装配, "万向节(输出) - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将差速器内的油放入适当的容器中,并且对油进行妥善保存或处理。 请参阅操作和保养手册, "变速箱和差速器用油 - 更换"。
- 拆下螺栓 (1) 、端盖 (2) 和垫片 (3) 。
Show/hide table
图 1 | g01561334 |
- 利用工具 (E) 拆下止推销 (4) 。
Show/hide table
图 2 | g01561337 |
- 将 O 型密封圈 (5) 从止推销 (4) 上拆下。
Show/hide table
图 3 | g01561341 |
- 拆下带有 X 标记的两条螺栓 (6) 。
Show/hide table
图 4 | g01529019 |
- 将工具 (B) 、工具 (C) 和工具 (D) 固定到后桥、差速器和终传动 (7) 的两侧。 后桥、差速器和终传动 (7) 的重量大约为 4128 kg (9100 lb)。
Show/hide table
图 5 | g01528874 |
Show/hide table
图 6 | g01528819 |
- 断开软管组件 (8) 。 断开线束组件 (9) 。 断开软管组件 (10) 。
Show/hide table
图 7 | g01529009 |
- 拆下夹子 (11) 。
Show/hide table
图 8 | g01529036 |
- 断开软管组件 (12) 。
Show/hide table
图 9 | g01529045 |
- 拆卸螺栓 (13) 。 在对面重新执行此步骤。
Show/hide table
图 10 | g01529072 |
- 拆下螺栓 (14) 。 在对面重新执行此步骤。
Show/hide table
图 11 | g01529069 |
- 拆下后桥、差速器和终传动 (7) 。
Show/hide table
图 12 | g01529126 |
Caterpillar Information System:
795F AC and 795F AC XQ Off-Highway Truck Steering System Piston Pump (Hydraulic Fan)
AP600D Asphalt Paver Propel System Piston Pump Flow - Test
AP600D Asphalt Paver Propel System Hydraulic Oil Contamination - Test
3054C Engines for Caterpillar Built Machines Fuel Injection Pump Timing - Adjust
RM-300 Reclaimer Mixer Machine Systems Control Console
420E and 430E Backhoe Loaders Hydraulic and Steering System Hydraulic Pump - Test and Adjust
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Exhaust Temperature Is Too High
420E and 430E Backhoe Loaders Hydraulic and Steering System Bank Valve (Loader) - If Equipped
24M Motor Grader Power Train Final Drive - Assemble
24M Motor Grader Power Train Final Drive - Disassemble
420E and 430E Backhoe Loaders Hydraulic and Steering System Makeup and Relief Valve
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Articulation Bearings - Lubricate
24M Motor Grader Power Train Rear Axle, Differential and Final Drive - Install
422E and 428E Backhoe Loaders Work Tool Flow Control - If Equipped
422E and 428E Backhoe Loaders Swing Lock Pin Control
AP600D Asphalt Paver Propel System Piston Pump Neutral - Test and Adjust
2008/05/19 A New Gasket is Available for Mounting of the Air Starting Motor {1451, 7555}
AS4251C Asphalt Screed Screed Frame (Extender) - Remove and Install
AS4251C Asphalt Screed Shoe (End Gate) - Remove and Install
432E, 434E, 442E and 444E Backhoe Loaders Rated Load
3512C Engine and 785D Off-Highway Truck/Tractors Diagnostic Trouble Codes
793F Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging) - Disassemble
432E, 434E, 442E and 444E Backhoe Loaders Specifications
AP555E and BG555E Asphalt Pavers Machine Systems Piston Motor (Propel) - Disassemble