C15 and C18 Generator Set Engines Caterpillar


Radiator Core - Remove and Install - Charge Air

Usage:

C15 115

拆卸步骤

开始:

  1. 拆下散热器顶部水箱。 请参阅拆解和组装, "散热器顶部水箱 - 拆卸和安装"。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g01392452

  1. 折下后冷器芯 (1) 。



    图 2g01392455

  1. 拆下密封 (2) 。

安装步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     207-1600 (1)     橡胶润滑剂     -    
207-1601 橡胶润滑剂     -    
( 1 ) 仅限 EAME



    图 3g01392455

  1. 将工具 (A) 涂抹在密封 (2) 上。 安装密封 (2) 。



    图 4g01392452

  1. 安装后冷器芯 (1) 。

End By: 拆下散热器顶部水箱。 请参阅 拆解和组装, "散热器顶部水箱 - 拆卸和安装"。

Caterpillar Information System:

3412E Engine for Caterpillar Built Machines Pressure Sensor - Calibrate
AP655D and BG655D Asphalt Pavers Machine Systems Hydraulic Schematic (Auxiliary Hydraulic System) - Steel Track Machine
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Control Manifold and Solenoid (Parking Brake) - Remove and Install
587R Pipelayer Machine Systems Boom Winch Motor - Install
587R Pipelayer Machine Systems Boom Winch Motor - Remove
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Main Control Valve
587R Pipelayer Machine Systems Accumulator - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track Drive - Install
2007/07/09 Acceptable Gap Between Lift Arm and Stop Block on Skid Steer Loaders and Multi Terrain Loaders {6119, 7050}
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track Drive - Assemble
3412E Engine for Caterpillar Built Machines Cat Data Link - Test
24M Motor Grader Power Train Electronic Control System Using Messenger to Determine Diagnostic Codes
AP655D and BG655D Asphalt Pavers Propel System General Information (Propel System) - Steel Track Machine
2007/07/30 Gasket for the Valve Mechanism Cover {1107, 1120, 7555}
3412E Engine for Caterpillar Built Machines Timing - Calibrate
AP655D and BG655D Asphalt Pavers Propel System Location of Hydraulic Components (Propel System) - Steel Track Machine
24M Motor Grader Power Train Transmission Lubrication
AP655D and BG655D Asphalt Pavers Propel System Piston Pump (Propel) - Steel Track Machine
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
2007/07/09 New Installation Sleeves for the Transmission Clutches Are Now Available {0720, 3030, 3155}
2010/09/13 Improvements to the Lower Transmission Mount {3082}
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 082 - CID 0967 - FMI 02
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 156 - CID 0967 - FMI 02
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 157 - CID 0967 - FMI 02
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.