Boom Winch Motor - Install
Installation Procedure
- Attach a suitable lifting device onto boom winch motor (14). Install boom winch motor (14). The weight of boom winch motor (14) is approximately 109 kg (240 lb). Install bolts (15) .
Show/hide table
Illustration 1 | g01392702 |
- Position accumulator (11). Tighten clamps (12), and (13).
Show/hide table
Illustration 2 | g01392701 |
- Connect hose assemblies (9), and (10) .
Show/hide table
Illustration 3 | g01392691 |
Show/hide table
Illustration 4 | g01392689 |
- Connect hose assembly (8) .
Show/hide table
Illustration 5 | g01392589 |
- Connect hose assemblies (5), (6), and (7) .
Show/hide table
Illustration 6 | g01392583 |
- Install panel (4) .
Show/hide table
Illustration 7 | g01392217 |
- Install panel (3) .
Show/hide table
Illustration 8 | g01392216 |
- Install panel (2) .
Show/hide table
Illustration 9 | g01392215 |
- Install guard (1) .
Show/hide table
Illustration 10 | g01392214 |
Caterpillar Information System:
587R Pipelayer Machine Systems Boom Winch Motor - Remove
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Main Control Valve
587R Pipelayer Machine Systems Accumulator - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track Drive - Install
2007/07/09 Acceptable Gap Between Lift Arm and Stop Block on Skid Steer Loaders and Multi Terrain Loaders {6119, 7050}
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track Drive - Assemble
3412E Engine for Caterpillar Built Machines Cat Data Link - Test
24M Motor Grader Power Train Electronic Control System Using Messenger to Determine Diagnostic Codes
C6.6 Engines for Caterpillar Built Machines Air Compressor - Remove and Install
C6.6 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C6.6 Engines for Caterpillar Built Machines Alternator - Install - Alternators with Mounting Lugs
C6.6 Engines for Caterpillar Built Machines Alternator - Install - Alternators with Mounting Pads
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Control Manifold and Solenoid (Parking Brake) - Remove and Install
AP655D and BG655D Asphalt Pavers Machine Systems Hydraulic Schematic (Auxiliary Hydraulic System) - Steel Track Machine
3412E Engine for Caterpillar Built Machines Pressure Sensor - Calibrate
C15 and C18 Generator Set Engines Radiator Core - Remove and Install - Charge Air
AP655D and BG655D Asphalt Pavers Propel System General Information (Propel System) - Steel Track Machine
2007/07/30 Gasket for the Valve Mechanism Cover {1107, 1120, 7555}
3412E Engine for Caterpillar Built Machines Timing - Calibrate
AP655D and BG655D Asphalt Pavers Propel System Location of Hydraulic Components (Propel System) - Steel Track Machine
24M Motor Grader Power Train Transmission Lubrication
AP655D and BG655D Asphalt Pavers Propel System Piston Pump (Propel) - Steel Track Machine
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
2007/07/09 New Installation Sleeves for the Transmission Clutches Are Now Available {0720, 3030, 3155}