Boom Winch Motor - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove guard (1) .
Show/hide table
Illustration 1 | g01392214 |
- Remove panel (2) .
Show/hide table
Illustration 2 | g01392215 |
- Remove panel (3) .
Show/hide table
Illustration 3 | g01392216 |
- Remove panel (4) .
Show/hide table
Illustration 4 | g01392217 |
- Disconnect hose assemblies (5), (6), and (7) .
Show/hide table
Illustration 5 | g01392583 |
- Disconnect hose assembly (8) .
Show/hide table
Illustration 6 | g01392589 |
- Disconnect hose assemblies (9), and (10) .
Show/hide table
Illustration 7 | g01392689 |
Show/hide table
Illustration 8 | g01392691 |
- Loosen clamps (12), and (13). Position accumulator (11) out of the way.
Show/hide table
Illustration 9 | g01392701 |
- Attach a suitable lifting device onto boom winch motor (14). Remove bolts (15). Remove boom winch motor (14). The weight of boom winch motor (14) is approximately 109 kg (240 lb).
Show/hide table
Illustration 10 | g01392702 |
Caterpillar Information System:
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Main Control Valve
587R Pipelayer Machine Systems Accumulator - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track Drive - Install
2007/07/09 Acceptable Gap Between Lift Arm and Stop Block on Skid Steer Loaders and Multi Terrain Loaders {6119, 7050}
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track Drive - Assemble
3412E Engine for Caterpillar Built Machines Cat Data Link - Test
24M Motor Grader Power Train Electronic Control System Using Messenger to Determine Diagnostic Codes
C6.6 Engines for Caterpillar Built Machines Air Compressor - Remove and Install
C6.6 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C6.6 Engines for Caterpillar Built Machines Alternator - Install - Alternators with Mounting Lugs
C6.6 Engines for Caterpillar Built Machines Alternator - Install - Alternators with Mounting Pads
C6.6 Engines for Caterpillar Built Machines Alternator - Remove - Alternators with Mounting Lugs
587R Pipelayer Machine Systems Boom Winch Motor - Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Control Manifold and Solenoid (Parking Brake) - Remove and Install
AP655D and BG655D Asphalt Pavers Machine Systems Hydraulic Schematic (Auxiliary Hydraulic System) - Steel Track Machine
3412E Engine for Caterpillar Built Machines Pressure Sensor - Calibrate
C15 and C18 Generator Set Engines Radiator Core - Remove and Install - Charge Air
AP655D and BG655D Asphalt Pavers Propel System General Information (Propel System) - Steel Track Machine
2007/07/30 Gasket for the Valve Mechanism Cover {1107, 1120, 7555}
3412E Engine for Caterpillar Built Machines Timing - Calibrate
AP655D and BG655D Asphalt Pavers Propel System Location of Hydraulic Components (Propel System) - Steel Track Machine
24M Motor Grader Power Train Transmission Lubrication
AP655D and BG655D Asphalt Pavers Propel System Piston Pump (Propel) - Steel Track Machine
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump