24M Motor Grader Power Train Caterpillar


Transmission Lubrication

Usage:

24M B93



图 1g01392517

行星润滑

(1) 1 号离合器壳体

(2) 2 号离合器的齿圈

(3) 行星轴

(4) 歧管

(5) 5 号离合器的齿圈

(6) 6 号离合器的齿圈

(7) 行星轴

(8) 6 号离合器

(9) 油道

(10) 油入口管线

(11) 油室

(12) 托架

(13) 油道

(14) 行星轴

(15) 行星轴

(16) 油室

(17) 油道

(18) 托架

(19) 油道

油从变矩器油冷却器流到入口 (10) 。 油流经油道 (9) 到达油室 (11) 。 油分流。 部分油经歧管 (4) 内的油道流到离合器 (8) 。 其余油流过油道 (13) 。

到达离合器 (8) 的油流经齿圈 (6) 内的小孔对盘和板进行润滑。 油还流到行星轴 (7) 。 此路油流经轴内的小孔到达行星齿轮的轴承。 还允许油流到变速箱的后齿轮。

油道 (13) 内的油流到变速箱前侧。 油道 (13) 是不同离合器壳体内相互对齐的一系列油道。 油流经油道 (13) 到达壳体 (1) 和托架 (18) 间的油室 (16) 。 油分流。 部分油流经油道 (19) 和变速箱的后部。

油流经油道 (19) 到达输入分动器。 输入分动器的回油流到分动器壳体的底部。 此路油随后流经变速箱壳体到达输出分动器壳体内的主油槽。

油室 (16) 流出的多数油流到行星轴 (15) 。 轴 (15) 内的小孔允许油流到 1 号行星齿轮的轴承。 油从轴 (15) 端部的小孔流出后到达行星轴 (14) 。 轴 (14) 内的小孔允许油流到 2 和 3 号行星齿轮的轴承。

油从轴 (14) 端部的小孔流出后到达行星轴 (3) 。 轴 (14) 内的小孔允许油流到 4 号行星齿轮的轴承。 油从轴 (15) 内的小孔流出后到达托架 (12) 。 油流过托架 (12) 内的小孔。 油流经齿圈 (5) 内的小孔到达 5 号离合器的盘和板。 同时,油流经油道到达 2 和 4 号离合器的盘和板。

所有返回润滑油流到变速箱壳体的底部。 随后允许此油流入油槽。

Caterpillar Information System:

AP655D and BG655D Asphalt Pavers Propel System Location of Hydraulic Components (Propel System) - Steel Track Machine
3412E Engine for Caterpillar Built Machines Timing - Calibrate
2007/07/30 Gasket for the Valve Mechanism Cover {1107, 1120, 7555}
AP655D and BG655D Asphalt Pavers Propel System General Information (Propel System) - Steel Track Machine
C15 and C18 Generator Set Engines Radiator Core - Remove and Install - Charge Air
3412E Engine for Caterpillar Built Machines Pressure Sensor - Calibrate
AP655D and BG655D Asphalt Pavers Machine Systems Hydraulic Schematic (Auxiliary Hydraulic System) - Steel Track Machine
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Control Manifold and Solenoid (Parking Brake) - Remove and Install
587R Pipelayer Machine Systems Boom Winch Motor - Install
587R Pipelayer Machine Systems Boom Winch Motor - Remove
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Main Control Valve
587R Pipelayer Machine Systems Accumulator - Remove and Install
AP655D and BG655D Asphalt Pavers Propel System Piston Pump (Propel) - Steel Track Machine
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
2007/07/09 New Installation Sleeves for the Transmission Clutches Are Now Available {0720, 3030, 3155}
2010/09/13 Improvements to the Lower Transmission Mount {3082}
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 082 - CID 0967 - FMI 02
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 156 - CID 0967 - FMI 02
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 157 - CID 0967 - FMI 02
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Idler Axle - Disassemble
160M Motor Grader Machine Systems Bank Valve - Remove - Rear Frame
AP655D and BG655D Asphalt Pavers Propel System Piston Motor (Propel) - Steel Track Machine
C15 and C18 Generator Set Engines Radiator Top Tank - Remove and Install - Charge Air
Seals for the Transmission Clutch Solenoid Modulating Valves May Leak{3139} Seals for the Transmission Clutch Solenoid Modulating Valves May Leak{3139}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.