Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 1P-1861 | Retaining Ring Pliers | 1 |
B | 136-1452 | Retaining Ring Pliers As | 1 |
C | 1P-0074 | Slide Hammer Puller Gp | 1 |
5F-7340 | Adapter | 1 | |
5F-7342 | Adapter | 1 | |
D | 1P-1859 | Retaining Ring Pliers | 1 |
E | 5P-5197 | Retaining Ring Pliers As | 1 |
F | FT-3081 | Adapter Plate | 1 |
G | 127-8458 | Final Drive Bench AR | 1 |
H | 308-5676 | Spanner Wrench Assembly | 1 |
J | 1H-3110 | Bearing Puller Gp | 1 |
K | 5F-7343 | Bearing Puller Gp | 1 |
Start By:
- Remove the piston motor.
- Remove bolts (1) and cover (2).
Show/hide table
Illustration 2 g01344080 - Remove O-ring seal (3).
Show/hide table
Illustration 3 g01345109 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove bolts (4) and head (5).
Show/hide table
Illustration 4 g01345111 - Remove O-ring seals (6), port plate (7), and bearing (8).
Show/hide table
Illustration 5 g01345112 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove plug (9).
Show/hide table
Illustration 6 g01345113 - Remove O-ring seal (12) from plug (9).
- Remove spring (11) and piston (10).
- Repeat Step 6 for the opposite side.
Show/hide table
Illustration 7 g01345114 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove plug (13), the O-ring seal, and spring (14).
- Remove plug (17), the O-ring seal, spring (16), and spool (15).
Show/hide table
Illustration 8 g01374429 Note: Do not move nut (14A) preset from supplier.
- Remove plug (14B), O-ring seal (14C), O-ring seal (14D), retainer (14E), spring (14F), and valve (14G).
Show/hide table
Illustration 9 g01345116 - Remove lip seal (18).
Show/hide table
Illustration 10 g01374430 - Remove springs (19), springs (20), O-ring seal (23), bearing race (23A), barrel (22), and piston (21).
- Remove the O-ring seals from piston (21).
Show/hide table
Illustration 11 g01345120 - Remove pins (24).
Show/hide table
Illustration 12 g01345123 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Use Tooling (A) and a suitable press in order to remove retaining ring (25) from barrel (22).
Show/hide table
Illustration 13 g01345124 - Remove washers (26) and spring (27) from barrel (22).
Show/hide table
Illustration 14 g01345125 - Remove piston (28) and the O-ring seal.
Show/hide table
Illustration 15 g01345126 - Remove discs (29) and plates (30).
Show/hide table
Illustration 16 g01345127 - Remove retainer (31), bearing (33), and pistons (32).
Show/hide table
Illustration 17 g01345129 - Remove swashplate (34).
Show/hide table
Illustration 18 g01374432 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove pistons (36) and shaft (35).
- Use a suitable press in order to remove bearing race (36A).
Show/hide table
Illustration 19 g01345131 - Remove balls (37), bearing (38), and springs (39).
Show/hide table
Illustration 20 g01345132 - Use Tooling (B) in order to remove retaining ring (40).
- Remove plugs (42) and the O-ring seals.
- Use Tooling (C) in order to remove cover (41).
Show/hide table
Illustration 21 g01345133 - Remove O-ring seal (43) and carrier assembly (44).
Show/hide table
Illustration 22 g01345135 - Use Tooling (D) in order to remove retaining rings (46).
- Remove gears (45) and gear (47).
Show/hide table
Illustration 23 g01345136 - Use Tooling (E) in order to remove retaining ring (48).
- Remove gear (49).
Show/hide table
Illustration 24 g01345138 - Use Tooling (D) in order to remove retaining rings (50).
- Remove gears (51).
Show/hide table
Illustration 25 g01345141 Show/hide tableIllustration 26 g01345140 Show/hide tableIllustration 27 g01345143 - Drill the stakes from nut (52).
- Install spindle (54) and housing (53) onto Tooling (F). Install Tooling (F) onto the bottom half of Tooling (G).
- Install Tooling (H) and Tooling (J).
- Install the remaining pieces of Tooling (G).
- Remove nut (52).
Show/hide table
Illustration 28 g01345144 - Use Tooling (H) and a suitable press in order to remove spindle (54) from housing (53).
Show/hide table
Illustration 29 g01345142 - Remove Dou-Cone seals (56) and (55).
Show/hide table
Illustration 30 g01345145 - Use Tooling (J) in order to remove bearing race (57).
Show/hide table
Illustration 31 g01345147 - Remove bearing assemblies (58) and bearing race (59).
Illustration 1 | g01344079 |