Swivel - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 311-1362     | 真空舱     | 1     |
B     | 138-7575     | 连杆支架     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 和适当的起吊设备安装旋转台座 (8) 。 旋转台座 (8) 的重量约为 39 kg (85 lb)。
Show/hide table
图 1 | g01342891 |
- 安装螺栓 (9) 。
- 提升支架 (7) 。 安装销 (6) 。 安装开口销 (5) 。
Show/hide table
图 2 | g01342888 |
- 连接软管组件 (4) 。 安装螺栓 (3) 。
Show/hide table
图 3 | g01342884 |
- 连接软管组件 (2) 和软管组件 (1) 。
Show/hide table
图 4 | g01342880 |
- 拆下工具 (A) 。
Show/hide table
图 5 | g01368952 |
- 检查液压系统的油位。 关于正确的程序,请参阅操作和保养手册, "液压油油位 - 检查"。
Caterpillar Information System:
16M Motor Grader Machine Systems Swivel - Remove
Filtration Procedure for Load, Haul, Dump Hydraulic Oil {0680, 0768, 5050, 5056, 5068} Filtration Procedure for Load, Haul, Dump Hydraulic Oil {0680, 0768, 5050, 5056, 5068}
PL1000E Communication ECM Hardware Configuration
770 and 772 Off-Highway Truck Power Train Governor Pedal
287C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Machine Systems Gear Pump (Charge) - Install - High Flow
287C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Machine Systems Gear Pump (Charge) - Remove - High Flow
14L Motor Grader All Wheel Drive Electronic Control System Electronic Control Module (ECM) - Replace
14L Motor Grader All Wheel Drive Electronic Control System Electronic Control Module (ECM) - Configure
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System Electronic Control Module (ECM) - Flash Program
14L Motor Grader All Wheel Drive Electronic Control System Wiring Harness (Short Circuit) - Test
14L Motor Grader All Wheel Drive Electronic Control System Wiring Harness (Open Circuit) - Test
Product Link PL121SR{7606} Product Link PL121SR{7606}
Procedure to Install Improved Software and Cable Assemblies on the Cold Planers{0779, 7620} Procedure to Install Improved Software and Cable Assemblies on the Cold Planers{0779, 7620}
14M Motor Grader Machine Systems Ripper - Remove
14M Motor Grader Machine Systems Ripper - Install
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Power Train Piston Motor (Hydrostatic) - Disassemble
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Power Train Piston Motor (Hydrostatic) - Assemble
2007/01/22 Use the Correct Parts in the Valve Train {1100}
2007/01/22 Use the Correct Parts in the Valve Train {1100}
773D Off-Highway Truck Power Train Electronic Control (Transmission Gear Indicator)
770 and 772 Off-Highway Truck Suspension Cylinder Rear Suspension (Cylinder)
770 and 772 Off-Highway Truck Suspension Cylinder Front Suspension (Cylinder)
770 and 772 Off-Highway Truck Suspension Cylinder Pressure Sensor (Payload Monitor) - If Equipped
3508 EUI Engine for Off-Highway Truck/Tractors Cylinder Block