C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Caterpillar


Gear Group - Inspect

Usage:

CB-22 220

表 1
工具  零件号  零件名称  数量 
A  9U-7324  千分表支架 
7H-1942 千分表 
3S-3268 千分表触针 
7H-1940 通用附件 


图 1g01335283

  1. 检查齿轮是否磨损或损坏。 如果一个或多个齿轮磨损或损坏,则用新零件更换。

  2. 使用工具 (A) 测量齿轮齿隙。 参考图 1。 若齿隙测量值超出最大值,安装新的齿轮。

    注: 关于最小和最大齿隙测量值,请参阅技术规格, "齿轮总成(前)"。

Caterpillar Information System:

C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Gear Group (Front) - Time
2008/07/14 Correction to Specifications , "Relief Valve (Line)" {5117}
2008/07/14 Correction to Specifications , "Relief Valve (Line)" {5117}
Procedure to Improve Cold Starting Capability for 950H Wheel Loader, 962H Wheel Loader , and IT62H Integrated Toolcarrier{1000, 1456, 7000} Procedure to Improve Cold Starting Capability for 950H Wheel Loader, 962H Wheel Loader , and IT62H Integrated Toolcarrier{1000, 1456, 7000}
777D and 777E Off-Highway Truck Hydraulic System Hoist Cylinder
Procedure to Improve Cold Starting Capability for 950G Series II Wheel Loader, 962G Series II Wheel Loader, and IT62G Series II Integrated Toolcarrier{1000, 1456, 7000} Procedure to Improve Cold Starting Capability for 950G Series II Wheel Loader, 962G Series II Wheel Loader, and IT62G Series II Integrated Toolcarrier{1000, 1456, 7000}
14M Motor Grader Power Train Transmission Oil Filter Base - Install
14M Motor Grader Power Train Transmission Oil Filter Base - Remove
2006/12/18 The Pump and Mounting Group Has Been Updated to Improve Seal Life {5070, 5073}
2006/12/18 An Update to the Exhaust Pipe Group Reduces Vibration of the Exhaust Lines {1061}
Procedures for Diagnosis of Turbochargers{1052, 1052, 1053} Procedures for Diagnosis of Turbochargers{1052, 1052, 1053}
3176C and 3196 Engines for Caterpillar Built Machines Belt Tensioner
Inspection of Core Plug and Rework Procedure{1306, 1361, 1378} Inspection of Core Plug and Rework Procedure{1306, 1361, 1378}
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 0590 - FMI 14
3306C Engines for Caterpillar Built Machines Crankcase Breather
12K, 140K and 160K Motor Graders Tire Shipping Pressure
2007/01/15 A New Protection Cover for the Ground Level Control on the Bumper Is Now Available {1408}
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Refrigerant Condenser and Mounting - Remove and Install
2006/12/11 A Different Parking Brake Valve Is Now Used {4282}
770 and 772 Off-Highway Trucks Power Train Position Switch (Truck Body)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Pilot Valve - Remove
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Pilot Valve - Assemble
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Pilot Valve - Disassemble
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Pilot Valve - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.