Belt Tensioner
Show/hide table
Illustration 1 | g01334897 |
(A) Minimum travel ... 50 degrees
(1) The torque for the spring is 90.40 ± 9.04 N·m (65 ± 7 lb ft) at 30 degrees from the released position.
Caterpillar Information System:
C4.4 (Mech) Industrial Engine Engine Oil Cooler
2008/07/14 Correction to Specifications , "Relief Valve (Line)" {5117}
2006/12/18 Improved Mounting for the Hydraulic Tank Now Used {5056}
773F Off-Highway Truck and 775F Off-Highway Truck Engine Supplement Fan - Remove and Install
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2810 - FMI 04
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2810 - FMI 03
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Tilt Cylinder - Remove and Install
770 and 772 Off-Highway Trucks Power Train Oil Filter (Power Train)
CB-534D, CB-534D XW and CB-564D Vibratory Compactors Machine Systems Final Drive Planetary - Assemble
CB-534D, CB-534D XW and CB-564D Vibratory Compactors Machine Systems Final Drive Planetary - Disassemble
C4.4 (Mech) Industrial Engine Fuel Injection Lines
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2954 - FMI 14
Procedures for Diagnosis of Turbochargers{1052, 1052, 1053} Procedures for Diagnosis of Turbochargers{1052, 1052, 1053}
2006/12/18 An Update to the Exhaust Pipe Group Reduces Vibration of the Exhaust Lines {1061}
2006/12/18 The Pump and Mounting Group Has Been Updated to Improve Seal Life {5070, 5073}
14M Motor Grader Power Train Transmission Oil Filter Base - Remove
14M Motor Grader Power Train Transmission Oil Filter Base - Install
Procedure to Improve Cold Starting Capability for 950G Series II Wheel Loader, 962G Series II Wheel Loader, and IT62G Series II Integrated Toolcarrier{1000, 1456, 7000} Procedure to Improve Cold Starting Capability for 950G Series II Wheel Loader, 962G Series II Wheel Loader, and IT62G Series II Integrated Toolcarrier{1000, 1456, 7000}
777D and 777E Off-Highway Truck Hydraulic System Hoist Cylinder
Procedure to Improve Cold Starting Capability for 950H Wheel Loader, 962H Wheel Loader , and IT62H Integrated Toolcarrier{1000, 1456, 7000} Procedure to Improve Cold Starting Capability for 950H Wheel Loader, 962H Wheel Loader , and IT62H Integrated Toolcarrier{1000, 1456, 7000}
2008/07/14 Correction to Specifications , "Relief Valve (Line)" {5117}
2008/07/14 Correction to Specifications , "Relief Valve (Line)" {5117}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Gear Group (Front) - Time
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Gear Group - Inspect