Transmission Oil Filter Base - Install
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 定位安装支架 (10) ，然后安装螺栓 (9) 。
Show/hide table
 | |
| 图 1 | g01335083 |
- 安装 O 形密封圈 (8) 。
Show/hide table
 | |
| 图 2 | g01335082 |
- 安装滤清器底座 (7) 。 安装螺栓 (6) 。
Show/hide table
 | |
| 图 3 | g01335080 |
- 连接软管组件 (5) 。 连接软管组件 (4) 。
Show/hide table
 | |
| 图 4 | g01335078 |
- 在滤清器壳体 (2) 中安装滤清器滤芯 (3) 。
Show/hide table
 | |
| 图 5 | g01335074 |
- 安装滤清器壳体 (2) 。 安装螺塞 (1) 。
Show/hide table
 | |
| 图 6 | g01335026 |
- 检查变速箱内的油位。 请参阅操作和保养手册, "变速箱和差速器油位 - 检查"。
Caterpillar Information System:
14M Motor Grader Power Train Transmission Oil Filter Base - Remove
2006/12/18 The Pump and Mounting Group Has Been Updated to Improve Seal Life {5070, 5073}
2006/12/18 An Update to the Exhaust Pipe Group Reduces Vibration of the Exhaust Lines {1061}
Procedures for Diagnosis of Turbochargers{1052, 1052, 1053} Procedures for Diagnosis of Turbochargers{1052, 1052, 1053}
3176C and 3196 Engines for Caterpillar Built Machines Belt Tensioner
C4.4 (Mech) Industrial Engine Engine Oil Cooler
2008/07/14 Correction to Specifications , "Relief Valve (Line)" {5117}
2006/12/18 Improved Mounting for the Hydraulic Tank Now Used {5056}
773F Off-Highway Truck and 775F Off-Highway Truck Engine Supplement Fan - Remove and Install
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2810 - FMI 04
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2810 - FMI 03
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Tilt Cylinder - Remove and Install
Procedure to Improve Cold Starting Capability for 950G Series II Wheel Loader, 962G Series II Wheel Loader, and IT62G Series II Integrated Toolcarrier{1000, 1456, 7000} Procedure to Improve Cold Starting Capability for 950G Series II Wheel Loader, 962G Series II Wheel Loader, and IT62G Series II Integrated Toolcarrier{1000, 1456, 7000}
777D and 777E Off-Highway Truck Hydraulic System Hoist Cylinder
Procedure to Improve Cold Starting Capability for 950H Wheel Loader, 962H Wheel Loader , and IT62H Integrated Toolcarrier{1000, 1456, 7000} Procedure to Improve Cold Starting Capability for 950H Wheel Loader, 962H Wheel Loader , and IT62H Integrated Toolcarrier{1000, 1456, 7000}
2008/07/14 Correction to Specifications , "Relief Valve (Line)" {5117}
2008/07/14 Correction to Specifications , "Relief Valve (Line)" {5117}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Gear Group (Front) - Time
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Gear Group - Inspect
Inspection of Core Plug and Rework Procedure{1306, 1361, 1378} Inspection of Core Plug and Rework Procedure{1306, 1361, 1378}
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 0590 - FMI 14
3306C Engines for Caterpillar Built Machines Crankcase Breather
12K, 140K and 160K Motor Graders Tire Shipping Pressure
2007/01/15 A New Protection Cover for the Ground Level Control on the Bumper Is Now Available {1408}