Transmission Oil Filter Base - Remove
拆卸步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
注: 为便于安装,在所有管路、软管、导线和管子上做出识别标记。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和防止污染物进入系统。
- 拆下螺塞 (1) 并将滤清器 (2) 中的油排入适当的容器中以便保存或处理。
Show/hide table
图 1 | g01335026 |
- 拆下滤清器壳体 (2) 。
- 从滤清器壳体 (2) 上拆下滤清器滤芯 (3) 。
Show/hide table
图 2 | g01335074 |
- 断开软管组件 (4) 。 断开软管组件 (5) 。
Show/hide table
图 3 | g01335078 |
- 拆下螺栓 (6) ,以拆下滤清器底座 (7) 。
Show/hide table
图 4 | g01335080 |
- 取下 O 形密封圈 (8) 。
Show/hide table
图 5 | g01335082 |
- 拆下螺栓 (9) 。 拆下安装支架 (10) 。
Show/hide table
图 6 | g01335083 |
Caterpillar Information System:
2006/12/18 The Pump and Mounting Group Has Been Updated to Improve Seal Life {5070, 5073}
2006/12/18 An Update to the Exhaust Pipe Group Reduces Vibration of the Exhaust Lines {1061}
Procedures for Diagnosis of Turbochargers{1052, 1052, 1053} Procedures for Diagnosis of Turbochargers{1052, 1052, 1053}
3176C and 3196 Engines for Caterpillar Built Machines Belt Tensioner
C4.4 (Mech) Industrial Engine Engine Oil Cooler
2008/07/14 Correction to Specifications , "Relief Valve (Line)" {5117}
2006/12/18 Improved Mounting for the Hydraulic Tank Now Used {5056}
773F Off-Highway Truck and 775F Off-Highway Truck Engine Supplement Fan - Remove and Install
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2810 - FMI 04
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2810 - FMI 03
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Tilt Cylinder - Remove and Install
770 and 772 Off-Highway Trucks Power Train Oil Filter (Power Train)
14M Motor Grader Power Train Transmission Oil Filter Base - Install
Procedure to Improve Cold Starting Capability for 950G Series II Wheel Loader, 962G Series II Wheel Loader, and IT62G Series II Integrated Toolcarrier{1000, 1456, 7000} Procedure to Improve Cold Starting Capability for 950G Series II Wheel Loader, 962G Series II Wheel Loader, and IT62G Series II Integrated Toolcarrier{1000, 1456, 7000}
777D and 777E Off-Highway Truck Hydraulic System Hoist Cylinder
Procedure to Improve Cold Starting Capability for 950H Wheel Loader, 962H Wheel Loader , and IT62H Integrated Toolcarrier{1000, 1456, 7000} Procedure to Improve Cold Starting Capability for 950H Wheel Loader, 962H Wheel Loader , and IT62H Integrated Toolcarrier{1000, 1456, 7000}
2008/07/14 Correction to Specifications , "Relief Valve (Line)" {5117}
2008/07/14 Correction to Specifications , "Relief Valve (Line)" {5117}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Gear Group (Front) - Time
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Gear Group - Inspect
Inspection of Core Plug and Rework Procedure{1306, 1361, 1378} Inspection of Core Plug and Rework Procedure{1306, 1361, 1378}
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 0590 - FMI 14
3306C Engines for Caterpillar Built Machines Crankcase Breather
12K, 140K and 160K Motor Graders Tire Shipping Pressure