Muffler
Show/hide table
 | |
| 图 1 | g03644723 |
Show/hide table
| 231-2160 消声器和安装件总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 380-9871 消音器卡箍 | 拧紧至扭矩为 40 ± 5 N·m (30 ± 4 lb ft)。 |
| 2 | 1 | 388-7016 弯曲螺栓卡箍 | 卡箍组件上的开口绝对不能与喷油器上的槽对齐。 拧紧至扭矩为 47 ± 5 N·m (35 ± 4 lb ft)。 |
| 3 | 1 | 9N-1941 V 形带卡箍 | 拧紧至扭矩为 8.5 ± 1.0 N·m (75.2 ± 8.9 lb in)。 |
| 4 | 1 | 250-0832 管 | 装配前，使用 Loctite C5A 铜防咬合剂润滑螺纹和轴承表面。 |
Caterpillar Information System:
2006/11/20 Secondary Cab Door Release Lever {7308}
246C, 256C, 262C and 272C Skid Steer Loaders Air Conditioner Condenser - Clean - If Equipped
3176C Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
277C, 287C and 297C Multi Terrain Loaders Aftercooler Core - Inspect/Clean
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Switch Circuits
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Starting System
14M and 16M Motor Graders Machine Systems Air Lines
Separation of the Spindle (Axle) from the Strut Puller Plate on Small Off-Highway Trucks{0756, 4305, 7200, 7201} Separation of the Spindle (Axle) from the Strut Puller Plate on Small Off-Highway Trucks{0756, 4305, 7200, 7201}
797B Off-Highway Truck Cable (Truck Body Retaining) - Inspect
2006/06/19 A New Filter Bypass Switch Is Now Available {1408, 1435, 5068}
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Pulse Width Modulated Sensor
The Fender Cover May Detach From the Backhoe Loader{7252} The Fender Cover May Detach From the Backhoe Loader{7252}
2006/07/17 A New Turbocharger is Now Used {1052, 1901, 7620}
C4.4 Industrial Engine Engine Valve Lash - Inspect/Adjust
RM-500 Road Reclaimer/Soil Stabilizer Power Train Piston Motor (Rear Propel) - Disassemble
14M and 16M Motor Graders Power Train Rear Axle
RM-500 Road Reclaimer/Soil Stabilizer Power Train Piston Motor (Rear Propel) - Assemble
AS2302 Vers-A-Mat Screed Screed - Remove and Install
AS2302 Vers-A-Mat Screed Platform - Remove and Install
AS2302 Vers-A-Mat Screed Screed Plate (Main) - Remove and Install
AS2302 Vers-A-Mat Screed Screed Plate (Extender) - Remove and Install
AS2302 Vers-A-Mat Screed Flow Control Valve (Vibratory) - Remove
AS2302 Vers-A-Mat Screed Flow Control Valve (Vibratory) - Install
AS2302 Vers-A-Mat Screed Flow Control Valve (Vibratory) - Disassemble