The Fender Cover May Detach From the Backhoe Loader{7252} Caterpillar

Backhoe Loader:

416E (S/N: SHA1-UP; CBD1-UP)

420E (S/N: HLS1-UP; KMW1-UP)

422E (S/N: HBE1-UP)

428E (S/N: SNL1-UP)

430E (S/N: DDT1-UP; EAT1-UP)

432E (S/N: BXE1-UP)

434E (S/N: FSH1-UP)

442E (S/N: GKZ1-UP)

444E (S/N: LBE1-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until the permanent solution is known, use the solution that is identified below.

Problem

Illustration 1	g01278875
View from right side rear (1) 213-1881 Rear Fender As (2) 213-1887 Fender Cover (3) 226-0291 Lock As

The 213-1887 Fender Cover (2) may open during machine roading or may open during transportation of the machine. This situation could cause damage to the fender cover. Also, the fender cover could detach from the machine.

Solution

Make sure that the 226-0291 Lock As (3) is completely locked before machine roading or transportation of the machine. Insert the key into the lock assembly and rotate fully in a clockwise direction in order to secure the fender cover to the 213-1881 Rear Fender As (1). This step will prevent unwanted opening of the fender cover.