A New Filter Bypass Switch Is Now Available {1408, 1435, 5068}
- Track Feller Buncher:
- TK741 (S/N: 2021-UP)
- TK751 (S/N: 3011-UP)
- TK752 (S/N: 3021-UP)
The original 3E-7891 Pressure Switch (HYDRAULIC FILTER BYPASS) can be replaced with a new 3E-7691 Pressure Switch (HYDRAULIC FILTER BYPASS) that has a higher pressure rating.
The new switch has a pressure setting of 520 kPa (75 psi). This will prevent any unnecessary derating of the machine.
Caterpillar Information System:
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Pulse Width Modulated Sensor
The Fender Cover May Detach From the Backhoe Loader{7252} The Fender Cover May Detach From the Backhoe Loader{7252}
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System Power Supply Circuit of Electronic Control Module
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0558 - FMI 06
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0558 - FMI 05
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0558 - FMI 03
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) System Schematic
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System Electronic Control Module (ECM)
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) Sensor - Adjust - Blade Slope Sensor
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) Sensor - Adjust - Mainfall Sensor
Bench Test Procedure For A 589 Pipelayer, D8L, D9L, D9N, And D10N Track-Type Tractor Torque Converter{3101} Bench Test Procedure For A 589 Pipelayer, D8L, D9L, D9N, And D10N Track-Type Tractor Torque Converter{3101}
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0533 - FMI 14
797B Off-Highway Truck Cable (Truck Body Retaining) - Inspect
Separation of the Spindle (Axle) from the Strut Puller Plate on Small Off-Highway Trucks{0756, 4305, 7200, 7201} Separation of the Spindle (Axle) from the Strut Puller Plate on Small Off-Highway Trucks{0756, 4305, 7200, 7201}
14M and 16M Motor Graders Machine Systems Air Lines
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Starting System
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Switch Circuits
277C, 287C and 297C Multi Terrain Loaders Aftercooler Core - Inspect/Clean
3176C Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
246C, 256C, 262C and 272C Skid Steer Loaders Air Conditioner Condenser - Clean - If Equipped
2006/11/20 Secondary Cab Door Release Lever {7308}
C11 and C13 Engines Muffler
2006/07/17 A New Turbocharger is Now Used {1052, 1901, 7620}
C4.4 Industrial Engine Engine Valve Lash - Inspect/Adjust