- Excavator:
- 320C FMST (S/N: BKK1001-UP; TBR1001-UP)
- 320C FMHW (S/N: BGB1001-UP; SAH1001-UP)
- 322C FMST (S/N: BPH1001-UP; M2H1001-UP)
- 322C FMHW (S/N: CAM1001-UP; C3R1001-UP; LAR1001-UP; CBY1001-UP)
- 322C FM LGP (S/N: BYL1001-UP; SLX1001-UP)
- 324D FM (S/N: JKR1-UP; JLS1-UP)
- 324D FM LGP (S/N: JGK1-UP)
- 325C FMST (S/N: G1L1001-UP)
- 325C FMHW (S/N: M2K1001-UP; S3M1001-UP; Y4P1001-UP)
- 325D FM (S/N: C7K1-UP; C8L1-UP)
- 330C FMST (S/N: B3M1001-UP)
- 330C FMHW (S/N: B1K1001-UP; B2L1001-UP; B4N1001-UP)
- 330D FM (S/N: H3K1-UP; L2K1-UP)
Description of Change: A secondary cab door release lever has been added to the cab of forest machines. The secondary cab door release lever provides an additional door latch for the cab door.
Adaptable To: A slot has been added to the 247-5767 Cover. The secondary cab door release lever is effective with the models that are listed in Table 1. The serial number effectivity of the cabs with the secondary cab door release lever is listed in Table 2.
The secondary cab door release lever is adaptable to the models that are listed. The cover and the components that are listed in Table 3 can be installed in order to add a secondary cab door release lever in the cab door.
| Effectivity Of The Secondary Cab Door Release Lever | ||
|---|---|---|
| Model | Effectivity | Adaptability |
| 320C FMHW | S/N:SAH1210 | S/N:SAH1001-1209 |
| 324D FM | S/N:JKR170 S/N:JLS161 |
S/N:JKR1-169 S/N:JLS1-160 |
| 324D FM LGP | S/N:JGK127 | S/N:JGK1-126 |
| 325D FM | S/N:C7K195 S/N:C8L161 |
S/N:C7K1-194 S/N:C8L1-160 |
| 330D FM | S/N:H3K227 S/N:L2K216 |
S/N:H3K1-226 S/N:L2K1-215 |
| Serial Number Effectivity Of The Cab | |
|---|---|
| Model | Serial Number On The Cab |
| 300C Excavator Family | S/N: 447-UP |
| 300D Excavator Family | S/N: 29-UP |
Installation Of A Secondary Cab Door Release Lever
Use the information that follows in order to install the secondary cab door release lever.
| Required Parts | |||
|---|---|---|---|
| Item | Qty | Part Number | Description |
| 1 | 1 | 268-9040 | Shaft |
| 2 | 1 | 8C-8888 | Ball Knob |
| 3 | 1 | 204-6101 | Hard Washer |
| 4 | 1 | 8T-0325 | Bolt |
| 5 | 1 | 247-5767 | Cover |
- Remove cover (5) from the inside of the cab door gp. The cover must be modified for the installation and movement of the secondary cab door release lever. Refer to Illustration 1.
 | |
| Illustration 1 | g01282483 |
237-2405 Cab Door Gp (5) 247-5767 Cover | |
- Modify cover (5) by cutting out the slot. Refer to Illustration 2.
 | |
| Illustration 2 | g01282485 |
247-5767 Cover (5) 247-5767 Cover (A) 74.5 mm (2.93 inch) (B) 53 mm (2.1 inch) Radius (C) 37 mm (1.46 inch) Radius (D) 33.8 mm (1.3 inch) (E) 0.7 mm (0.03 inch) (F) 10 mm (0.4 inch) (G) 23.5 mm (0.9 inch) (H) 13.3 mm (0.5 inch) (J) 6.1 mm (0.24 inch) (K) 44.8 mm (1.76 inch) (L) 5 mm (0.2 inch) Radius at two places (M) 8 mm (0.3 inch) Radius at two places | |
- Install shaft (1) on the latch assembly. Use bolt (4) and hard washer (3). Refer to Illustration 3.
 | |
| Illustration 3 | g01282487 |
170-7708 Latch As (1) 268-9040 Shaft (3) 204-6101 Hard Washer (4) 8T-0325 Bolt | |
- Reinstall cover (5) .
